AcroRead 4 Linux: Error processing page ?
Vladimir Klejch
kleo na iris.vszbr.cz
Pátek Červenec 4 09:30:22 CEST 1997
On Fri, 4 Jul 1997, Petr Olsak wrote:
>
>
> Pricinu zavady pri 24bitech jsme zatim neodhalili, takze pokud by nekdo
> mel podobny problem, muze si srovnat nasi HW/SW konfiguraci.
>
> Xserver XF86_SVGA (standardni neprekompilovany z distribuce Slack3.2),
> graficky adapter Matrox Millenium 4MB, rozliseni 1280x1024 pri 24bit/pixel
> (to je to, co zlobi) nebo 1600x1200 pri 16bit/pixel (to funguje). Monitor
> (ten s tim ma asi nejmin spolecneho) ViewSonic P815, 21in.
>
> Petr Olsak
>
Zdravim
Zkusili jste i XF86_SVGA 3.3 ?
V dokumentaci se pise (README.MGA):
>1. Supported hardware
>
>The current MGA driver in the SVGA server supports the Matrox Millennium
>(MGA2064W) with Ti3026 RAMDAC. It has been tested with 175, 220MHz, and
>250MHz cards with 2MB, 4MB and 8MB WRAM. It also supports, for the first
>time, Matrox Mystique (MGA1064SG) board tested up to 135 MHz for 2 and 4
> MB configs.
...
>
> o Basic support for the Matrox Millennium video adapter
>
...
>
> o it should be possible to reach resolutions up to 1920x1024
>
> o it should be possible to use pixel depths of 8, 16, 24, and 32
> bits
> The Millennium server is fairly well accelerated, and is one
> of the fastest XFree86 3.3 Xservers.
.......
Mozna by to pomohlo ... :-)))~
Zatim ...
Kleo
-- ~~ ~~ ~~ ~~ ~~ ~~ ~~
Vladimir `KLEO' Klejch Kleo na iris.vszbr.cz
... ... ... ...
PS: Windoze95 nemuze byt virus ...
Virus je inteligentne naprogramovany a neco dela ...
Další informace o konferenci Linux