MOXA C104
Radek Andrs
radek na indat.space.cz
Pátek Září 5 14:59:04 CEST 1997
> Odesílatel: hampl <hampl na ttc.cz>
>
> Ma nekdo zkusenosi s MOXA C104PLUS pod Linuxem 2.0.x ?
Nevim jestli vam to pomuze, avsak ukazu Vam jak to resime
u nas.
Uz cca ctyri mesice pouzivame podobnou kartu Moxa C168P
(8-mi portova) v linuxu 2.0.28, kde ji mame zpristupnenou
stejne jako i ty dva porty na desce v rc.serial jako:
rc.serial
------------------------------------------------------------------
###############################################################
#
# MANUAL CONFIGURATION
#
# If you want to do manual configuration of one or more of your
# serial ports, uncomment and modify the relevant lines.
#
###############################################################
# These are the standard COM1 through COM4 devices
#
${SETSERIAL} /dev/cua0 uart 16550A port 0x3F8 irq 4
${SETSERIAL} /dev/cua1 uart 16550A port 0x2F8 irq 3
# ${SETSERIAL} /dev/cua2 uart 16450 port 0x3E8 irq 4
# ${SETSERIAL} /dev/cua3 uart 16450 port 0x2E8 irq 3
..
..
..
..
# These are the ports used for either the Usenet Serial II
# board, or the Boca Board 4, 8, or 16 port boards.
#
# Uncomment only the first 4 lines for the Usenet Serial II board,
# and uncomment the first 4, 8, or all 16 lines for the
# Boca Board BB-1004, BB-1008, and BB-2016 respectively.
#
${SETSERIAL} /dev/cua16 uart 16550A port 0x100 irq 12
${SETSERIAL} /dev/cua17 uart 16550A port 0x108 irq 12
${SETSERIAL} /dev/cua18 uart 16550A port 0x110 irq 12
${SETSERIAL} /dev/cua19 uart 16550A port 0x118 irq 12
${SETSERIAL} /dev/cua20 uart 16550A port 0x120 irq 12
${SETSERIAL} /dev/cua21 uart 16550A port 0x128 irq 12
${SETSERIAL} /dev/cua22 uart 16550A port 0x130 irq 12
${SETSERIAL} /dev/cua23 uart 16550A port 0x138 irq 12
# ${SETSERIAL} /dev/cua24 uart 16550A port 0x140 irq 12
# ${SETSERIAL} /dev/cua25 uart 16550A port 0x148 irq 12
# ${SETSERIAL} /dev/cua26 uart 16550A port 0x150 irq 12
# ${SETSERIAL} /dev/cua27 uart 16550A port 0x158 irq 12
# ${SETSERIAL} /dev/cua28 uart 16550A port 0x160 irq 12
# ${SETSERIAL} /dev/cua29 uart 16550A port 0x168 irq 12
# ${SETSERIAL} /dev/cua30 uart 16550A port 0x170 irq 12
# ${SETSERIAL} /dev/cua31 uart 16550A port 0x178 irq 12
###########################################################
--------------------------------------------------------------------------
Samozrejme jme ji sofwarove nastavili jako urcenou pro linux
a tudiz kompatibilni s BocaBoard.
Potom z ni mame zprovozneny zatim tri porty v inittabu, kde
na nich sedi mgetty a hlida dial-up modemy (s rychlosti
38400)
inittab
--------------------------------------------------------
..
..
..
# Dialup lines
d1:12345:respawn:/usr/sbin/mgetty -D -s 38400 -n 1 -i /etc/issue -p "(0)Remote login:" ttyS16
d2:12345:respawn:/usr/sbin/mgetty -D -s 38400 -n 1 -i /etc/issue -p "(1)Remote login:" ttyS17
#d2:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS1 vt100
d3:12345:respawn:/usr/sbin/mgetty -D -s 38400 -n 1 -i /etc/issue -p "(2)Remote login:" ttyS18
#d4:45:respawn:/usr/sbin/mgetty -D -s 38400 -n 1 -i /etc/issue -p "(3)Remote login:" cua19
..
..
-----------------------------------------------------
Snad Vam to trochu pomuze
S pozdravem
Radek Andrs
INTERDATA
radek na indat.space.cz
Další informace o konferenci Linux