HELP: Stavkujici harddisk

[Pavel Machek]

Ahoj!

> Prave instaluju Redhat 5.0 na novy pocitac a v podstate znicehonic se
> najednou z linuxu nemuzu namontovat na windosovse partition. Pri
> startu to zacalo hlasit tyto hlasky:
> 
> ide: i82371 PIIX (Triton) on PCI bus 0 function 57
>     ide0: BM-DMA at 0xffa0-0xffa7
>     ide1: BM-DMA at 0xffa8-0xffaf
> hda: ST34321A, 4103MB w/128kB Cache, CHS=523/255/63
> hdb: SAMSUNG CD-ROM SCR-2432, ATAPI CDROM drive
> hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
>  hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> po teto hlasce uz si to potom stezuje nasledujici zpusobem, ze nemuze
> namontovat ty dosovske partition:

Zkus zakomentovat tenhle kod (ide-disk.c) a/nebo vypnout podporu pro
advanced ffeatury u ide v kernelu (vypnout CONFIG_BLK_DEV_TRITON a
kamarady).
	
								Pavel

        } else if (s->b.set_multmode) {
                s->b.set_multmode = 0;
                if (drive->id && drive->mult_req >
drive->id->max_multsect)
                        drive->mult_req = drive->id->max_multsect;
                if (!IS_PDC4030_DRIVE)
                        ide_cmd(drive, WIN_SETMULT, drive->mult_req,
&set_multmode_intr);
        } else if (s->all) {



-- 
I'm really pavel na atrey.karlin.mff.cuni.cz. 	   Pavel
Look at http://atrey.karlin.mff.cuni.cz/~pavel/ ;-).