Fat32, konfigurace XFree86

[Petr Beranek]

Je mi jasne, ze opice Zofka by na to prisla za 5 min., avsak ja, naprosty
zacatecnik se s  tim potim (bezvysledne) 2 dny.

Mam
Pentium II, 350 MHz
monitor Compal TM 554
Karta S3 Virge/GX2 AGP 3D
RedHat 5.1., Kernel 2.0.35

Problemy :

1. Jak pripojit partition   Fat32 na HD
(asi mam jemno typu souboroveho systemu, pro DOS a CDROM mi to funguje )

2. Nedaří se mi nastavit XFree86
V adresari /usr/X11R6/bin mam jen server XF86_S3V

Pri zkousce ziskam tento vypis :
----------------------------------------------------------------------------
-------
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
  S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
      s3_ViRGE
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) S3V: Graphics device ID: "My Video Card"
(**) S3V: Monitor ID: "Compal TM554"
(--) S3V: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) S3V: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) S3V: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us
r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/
X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X
11/fonts/100dpi/"
(--) S3V: PCI: ViRGE/GX2 rev 6, Linear FB @ 0xd8000000
(--) S3V: chipset:   ViRGE/GX2 rev. 6
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram:  4096k
(--) S3V: for ViRGE/DX/GX chips you shouldn't specify any Clockchip
  other than "s3_trio64v2" or maybe "s3_trio64"
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 90.000 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "640x480": mode clock =  25.175
(--) S3V: There is no mode definition named "800x600"
(--) S3V: Removing mode "800x600" from list of valid modes.
(--) S3V: There is no mode definition named "1024x768"
(--) S3V: Removing mode "1024x768" from list of valid modes.
(--) S3V: There is no mode definition named "1280x1024"
(--) S3V: Removing mode "1280x1024" from list of valid modes.
(--) S3V: Using 6 bits per RGB value
(--) S3V: videoram usage reduced to 2560k to avoid co-ord overflow
(--) S3V: Virtual resolution set to 640x480
(--) S3V: Local bus LAW is 0xD80xxxxx
(--) S3V: Using a banksize of 2560k, line width of 640
----------------------------------------------------------------------------
-------
a z toho moc moudry nejsem - frekcence v upozorneni jsou mimo parametry
monitoru.


--
Petr Beranek
EKPetBe na seznam.cz