Problem s DHCPD
Lubomir Svec
lubomir.svec na epe.cz
Středa Březen 10 11:46:33 CET 1999
Ahoj,
Zkusil bych to co pise man dhcpd.conf a snad to bude fachat
(vyzkouseno to ale nemam):
server-identifier hostname;
The server-identifier statement can be used to define the
value that is sent in the DHCP Server Identifier option
for a given scope. The value specified must be an IP
address for the DHCP server, and must be reachable by all
clients served by a particular scope.
The use of the server-identifier statement is not recom-
mended - the only reason to use it is to force a value
other than the default value to be sent on occasions where
the default value would be incorrect. The default value
is the first IP address associated with the physical net-
work interface on which the request arrived. The usual
case where the server-identifier statement needs to be
sent is when a physical interface has more than one IP
address, and the one being sent by default isn't appropri-
ate for some or all clients served by that interface.
Lukas Macura wrote:
>
> Dobry den,
>
> musim se znovu obratit do tohoto listu, protoze si nevim rady :(
>
> Konfiguruju dhcpd, ale potrebuju docilit ponekud exotickeho stavu
> konfigurace.
>
> Mam 3 virtualni site na jednom segmentu (x.x.208.0, x.x.212.0, x.x.213.0)
> (respektive chtel bych se k tomuto stavu dostat tak, ze si rozdelim hw
> adresy pocitacu na teto siti do 3 skupin, a na zaklade hw adresy priradim
--
==============================================================
Lubomir Svec | EXPERT & PARTNER engineering
mailto:lubomir.svec na epe.cz | spol. s r.o.
tel: (+420 2) 67208111 | Na Lysinach 852/41
fax: (+420 2) 67208333 | 147 00 Praha 4 - Hodkovicky
http://www.epe.cz/ | Czech Republic
==============================================================
Linux is like a wigwam - no windows, no gates, apache inside!
==============================================================
Další informace o konferenci Linux