modem Askey 56K PCI, POMOC (mirne OT)

[Petr Hodan]

> Hi!

> > > > Znamena to teda ze s jadrem 2.2.x by to mohlo fungovat?
> > > 
> > > No pri kompilaci jsem zahledl, neco jako povoleni serial PCI (2.2.12).
> > > 
> > 
> > Zdravim, ja ted resim podobnej problem s internim Diamondem 56. Modem beha
> > pod W9x v pohode, ale pod linuxem nejde. Je to tim, ze ma sice irq a port
> > nastavenej, ale pouziva horni pamet od ffae0000 do ffaeffff. Jinak v
> > jadre 2.3.22 je podpora serial portu na PCI zahrnuta, ale dle vyjadreni diamondu
> > neni supraMax cisty modem, ale neni to ani winmodem, jen nejaky jeho
> > funkce vykonava driver (asi pres tu horni pamet). Na dotaz k diamondu, zda
> > by nevystrachali zdrojaky sem dostal odpoved ze "jako neee"
> > btw: nema nekdo nejaky zkusenosti?

> A hele, ze by winmodem s DSPckem? Nejspis jo. Zjistete pci ids...
> 								Pavel

Zdravim,

pri vypisu z /proc/pci se to tvari pokazdy jinak dle verze kernelu. Pro
kernel 2.2.13 to je:

----
/proc/pci:

  Bus  0, device   9, function  0:
    Serial controller: Unknown vendor Unknown device (rev 1).
      Vendor id=127a. Device id=1002.
      Medium devsel.  Fast back-to-back capable.  IRQ 10.  Master Capable.  Latency=32.  Min Gnt=255.Max Lat=255.
      Non-prefetchable 32 bit memory at 0xffae0000 [0xffae0000].
----
a pro 2.3.23 to je:
----
/proc/pci:

  Bus  0, device   9, function  0:
    Serial controller: PCI device 127a:1002 (rev 1).
      IRQ 10.
      Master Capable.  Latency=32.  Min Gnt=255.Max Lat=255.
      Non-prefetchable 32 bit memory at 0xffae0000 [0xffaeffff].
----
jeste pridam neco zajimaveho z dmesg...
----
Linux version 2.3.23 (root na penguin) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 St říj 27 17:07:44 CEST 1999
e820: 0009fc00 @ 00000000 (usable)
e820: 00000400 @ 0009fc00 (reserved)
e820: 00020000 @ 000e0000 (reserved)
e820: 01f00000 @ 00100000 (usable)
e820: 00001000 @ fec00000 (reserved)
e820: 00001000 @ fee00000 (reserved)
e820: 00020000 @ fffe0000 (reserved)
....
....
Serial driver version 4.30 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ DETECT_IRQ SERIAL_PCI PCI_IOMEM enabled
io mapaddr 0x40282 not valid at serial.c:432!
.....
/* asi 5 radek - io mapaddr 0x10282 not valid at serial.c:469! */
ttyS00 at 0x03f8 (irq = 0) is a 16550A
ttyS01 at 0x02f8 (irq = 0) is a 16550A
....
....
Trying to free nonexistent resource <03e8-03ef> /* adresa ttyS2 */
LSR safety check engaged! -- pri pokusu o zapis na /dev/ttyS2
-----

jelikoz bezim na RH 6.1, kudzu (prog pro rozpoznavani hardware) ho najde
jako modem:

/etc/sysconfig/hwconf:

----
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Rockwell International|HCF 56k V90 FaxModem"
vendorId: 127a
deviceId: 1002
----

    Diky Petr Hodan
    

Why use Windows, when there are doors with Penguin?
---------------------------------------------------
 THaleZ Linux Zone: http://www.penguin.cz/~thalez
    THaleZ ultimate mail: thalez na penguin.cz
                icq: #52561076