shaper: je na tom neco spatne?
Petr Snajdr
snajdr na firma.seznam.cz
Pátek Září 17 10:14:53 CEST 1999
On 16 Sep 1999, David Rohleder wrote:
> > IP="192.168.2.4"
> > NET="192.168.2.0"
> > NETMASK="255.255.255.0"
> > BCAST="192.168.2.255"
> > GW="192.168.2.1"
> >
> > ifconfig eth1 $IP netmask $NETMASK broadcast $BCAST up
> > shapecfg attach shaper0 eth1
> > shapecfg speed shaper0 256000
> > ifconfig shaper0 $IP netmask $NET broadcast $BCAST up
> >
> > route del -net $NET netmask $NETMASK dev eth1
> > route del default
>
> route add -net $NET netmask $NETMASK dev shaper0 ?
Bohuzel ne.
> > route add default gw $GW dev shaper0
takto vypadaji routy kdyz to funguje bez shaperu:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.2.1 0.0.0.0 UG 1 0 0 eth1
a takto se shaperem (to, ale nefunguje):
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 shaper0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 shaper0
Ovsem nevim zdali se to nemuze "mlatit" s necim dalsim. S IP
forwarding zrejme ne :), co maskarada? Jeste jsem
podezrival ipchains, ze je tam nekde pravidlo povolujici
neco pouze na eth1 (nevim zdali by to vadilo), ale stejne tam
nic tak konkretniho neni.
Jadro: 2.2.12
--
S pozdravem
Petr Snajdr
Seznam Ceskeho Internetu: http://www.seznam.cz/
Magazin pro kazdeho: http://www.novinky.cz/
Seznam Dnes: http://dnes.seznam.cz/
Navody, recenze, technika:
http://www.novinky.cz/Index/TechDesk/
------------------------------------------------------
Zacit se dnes ucit Perl je jako koupit si listek na Titanic
Další informace o konferenci Linux