ext modem nefunguje, interni ano

[David Kuzela]

Milos Prudek pise:
> # setserial -a /dev/ttyS0
> /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
>         Baud_base: 115200, close_delay: 50, divisor: 0
>         closing_wait: 3000, closing_wait2: infinte
>         Flags: spd_normal skip_test 

Ja mam nastaveny navic flag "session_lockout", ale to by nemelo hrat roli.
 
> log (interni modem):
> 
> Apr 20 17:30:14 prudek chat[585]: send (ATX3L2DT0971100811^M)
> Apr 20 17:30:15 prudek chat[585]: expect (CONNECT)
> Apr 20 17:30:15 prudek chat[585]: ^M
> Apr 20 17:30:39 prudek chat[585]: ATX3L2DT0971100811^M^M
> Apr 20 17:30:39 prudek chat[585]: CONNECT
> Apr 20 17:30:39 prudek chat[585]:  -- got it 
> Apr 20 17:30:39 prudek chat[585]: send (^M)
> Apr 20 17:30:39 prudek pppd[583]: Serial connection established.
> Apr 20 17:30:39 prudek pppd[583]: Using interface ppp0
> Apr 20 17:30:39 prudek pppd[583]: Connect: ppp0 <--> /dev/ttyS0
> Apr 20 17:30:40 prudek pppd[583]: Remote message: ^F
> Apr 20 17:30:40 prudek kernel: PPP BSD Compression module registered 
> Apr 20 17:30:40 prudek kernel: PPP Deflate Compression module registered 
> Apr 20 17:30:40 prudek pppd[583]: local  IP address 212.11.105.126
> Apr 20 17:30:40 prudek pppd[583]: remote IP address 212.11.105.2

Tohle neni debug mod. Ten je prece jen o neco podrobnejsi, log by mel vypadat 
(v pripade uspesneho spoujeni) nasledovne:

   Serial connection established.
   Using interface ppp0
   Connect: ppp0 <--> /dev/ttyS0
   sent [LCP ConfReq id=0x1 <mru 566> <asyncmap 0x0> <magic 0x5fe9faa2> <pcomp> <accomp>]
   rcvd [LCP ConfNak id=0x1 <mru 1500>]
   sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x5fe9faa2> <pcomp> <accomp>]
   rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x5fe9faa2> <pcomp> <accomp>]
   rcvd [LCP ConfReq id=0x58 <asyncmap 0xa0000> <auth pap> <magic 0xfed18ffa> <pcomp> <accomp>]
   sent [LCP ConfAck id=0x58 <asyncmap 0xa0000> <auth pap> <magic 0xfedeebf2> <pcomp> <accomp>]
   sent [LCP EchoReq id=0x0 magic=0x55e9f8e2]
   sent [PAP AuthReq id=0x1 user="czXXXXXX na worldonline.cz" password="MOJE_HESLO"]
   rcvd [LCP EchoRep id=0x0 magic=0xfefd18fa]
   rcvd [PAP AuthAck id=0x1 ""]
   Remote message:
   sent [IPCP ConfReq id=0x1 <addr 192.168.10.1> <compress VJ 0f 01>]
   rcvd [IPCP ConfReq id=0xe5 <compress VJ 0f 00> <addr 195.146.126.4>]
   sent [IPCP ConfAck id=0xe5 <compress VJ 0f 00> <addr 195.146.126.4>]
   rcvd [IPCP ConfNak id=0x1 <addr 195.146.126.86>]
   sent [IPCP ConfReq id=0x2 <addr 195.146.126.86> <compress VJ 0f 01>]
   rcvd [IPCP ConfAck id=0x2 <addr 195.146.126.86> <compress VJ 0f 01>]
   local  IP address 195.146.126.86
   remote IP address 195.146.126.4
   

pppd cte vice konfiguracnich souboru:

   1. /etc/ppp/options - tento soubor obsahuje globalni nastaveni platne pro
      cely system
   2. ~/.ppprc - kazdy uzivatel muze mit ve svem domacim direktorari sve
      vlastni nastaveni
   3. Prikazova radka - pokud je nutne zmenit parametr zadany jednim z vyse
      uvedenych zpusobu, lze to udelat prave odtud (samozrejme lze take zadavat
      parametry jeste nepouzite)
   4. /etc/ppp/options.ttyS[n] - tento soubor umoznuje urcit nastaveni
      specificke pro kazdy z modemu (dle portu, na ktery je pripojen), zaroven
      take umoznuje spravci systemu nastavit parametry, ktere nebudou moci
      uzivatele nijak zmenit.

Zkontrolujte, zda v nekterem z nich debug nezakazujete. 

Ted me jeste napadlo - poslal jste vubec vypis z /var/log/ppp.log na ne z
/var/log/messages?

-- 
                                   David Kužela
==[Dawyd]======[icq]=[24470559]===================
 email:       kuzela na mbox.vol.cz   Student of VSE
 web:   http://penguin.cz/~dawyd   Czech republic
==================================================