problémy s mailem
the_ment na centrum.cz
the_ment na centrum.cz
Čtvrtek Duben 27 20:25:17 CEST 2000
tady tyhle soubory sem vytah
z /var/log/exim/ a /var/spool/exim/
v logu z /var/log/exim/mainlog se dokola opakuje jenom
2000-04-20 00:38:05 End queue run: pid=481
2000-04-21 22:53:05 Start queue run: pid=186
2000-04-21 22:53:06 12gSyx-0000Fy-00 Message is frozen
2000-04-21 22:53:06 12gSxz-0000Fq-00 Message is frozen
2000-04-21 22:53:06 12gSld-0000Ew-00 Message is frozen
2000-04-21 22:53:06 12gSYD-0000ER-00 Message is frozen
2000-04-21 22:53:06 12gSEX-0000CH-00 Message is frozen
2000-04-21 22:53:06 12g1cx-00003u-00 Message is frozen
2000-04-21 22:53:06 12g1co-00003o-00 Message is frozen
2000-04-21 22:53:06 12g1cU-00003c-00 Message is frozen
2000-04-21 22:53:06 12frRM-00009t-00 Message is frozen
2000-04-21 22:53:06 12g1cc-00003i-00 Message is frozen
2000-04-21 22:53:06 12gQmk-00006s-00 Message is frozen
2000-04-21 22:53:06 12gQn7-000072-00 Message is frozen
2000-04-21 22:53:06 12gSM0-0000Cq-00 Message is frozen
2000-04-21 22:53:07 12gSNz-0000D4-00 Message is frozen
2000-04-21 22:53:07 12gSPA-0000DD-00 Message is frozen
2000-04-21 22:53:07 12gSVx-0000DY-00 Message is frozen
2000-04-21 22:53:07 12gSXY-0000E3-00 Message is frozen
2000-04-21 22:53:07 12gSXp-0000EC-00 Message is frozen
2000-04-21 22:53:07 12gSXr-0000EI-00 Message is frozen
2000-04-21 22:53:07 12gSlI-0000Ep-00 Message is frozen
2000-04-21 22:53:07 12gSxm-0000Fl-00 Message is frozen
2000-04-21 22:53:07 12gT34-0000Gn-00 Message is frozen
2000-04-21 22:53:07 12gT8Q-0000HR-00 Message is frozen
2000-04-21 22:53:07 End queue run: pid=186
exim.conf vypada takhle:
######################################################################
# Runtime configuration file for Exim
#
######################################################################
# This is a default configuration file which will operate correctly
in
# uncomplicated installations. Please see the manual for a complete
list
# of all the runtime configuration options that can be included in a
# configuration file.
# This file is divided into several parts, all but the last of which
are
# terminated by a line containing the word "end". The parts must
appear
# in the correct order, and all must be present (even if some of them
are
# in fact empty). Blank lines, and lines starting with # are
ignored.
######################################################################
# MAIN CONFIGURATION SETTINGS
#
######################################################################
# Specify your host's canonical name here. This should normally be the
fully
# qualified "official" name of your host. If this option is not set,
the
# uname() function is called to obtain the name.
primary_hostname = kurvinek
# Specify the domain you want to be added to all unqualified
addresses
# here. An unqualified address is one that does not contain an "@"
character
# followed by a domain. For example, "caesar na rome.ex" is a fully
qualified
# address, but the string "caesar" (i.e. just a login name) is an
unqualified
# email address. Unqualified addresses are accepted only from local
callers by
# default. See the receiver_unqualified_{hosts,nets} options if you
want
# to permit unqualified addresses from remote sources. If this option
is
# not set, the primary_hostname value is used for qualification.
qualify_domain = kurvinek
# If you want unqualified recipient addresses to be qualified with a
different
# domain to unqualified sender addresses, specify the recipient domain
here.
# If this option is not set, the qualify_domain value is used.
# qualify_recipient =
# Specify your local domains as a colon-separated list here. If this
option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do
not want
# to do any local deliveries, uncomment the following line, but do not
supply
# any data for it. This sets local_domains to an empty string, which
is not
# the same as not mentioning it at all. An empty string specifies that
there
# are no local domains; not setting it at all causes the default value
(the
# setting of qualify_recipient) to be used.
# local_domains =
# If you want to accept mail addressed to your host's literal IP
address, for
# example, mail addressed to "user@[111.111.111.111]", then uncomment
the
# following line, or supply the literal domain(s) as part of
"local_domains"
# above.
local_domains_include_host_literals
local_domains_include_host = true
# No local deliveries will ever be run under the uids of these users
(a colon-
# separated list). An attempt to do so gets changed so that it runs
under the
# uid of "nobody" instead. This is a paranoic safety catch. Note the
default
# setting means you cannot deliver mail addressed to root as if it
were a
# normal user. This isn't usually a problem, as most sites have an
alias for
# root that redirects such mail to a human administrator.
# never_users = root
# The setting below causes Exim to do a reverse DNS lookup on all
incoming
# IP calls, in order to get the true host name. If you feel this is
too
# expensive, you can specify the networks for which a lookup is done,
or
# remove the setting entirely.
host_lookup_nets = 0.0.0.0/0
# Exim contains support for the Realtime Blocking List (RBL) that is
being
# maintained as part of the DNS. See http://maps.vix.com/rbl/ for
background.
# Uncommenting the following line will make Exim reject mail from
any
# host whose IP address is blacklisted in the RBL at maps.vix.com.
# rbl_domains = rbl.maps.vix.com
# The setting below locks out the use of your host as a mail relay by
any
# other host. If you want to permit relaying through your host from
certain
# hosts or IP networks, you need to vary this option and/or make use
of the
# other three options in the set
sender_{host,net}_{accept,reject}_relay.
# See the section of the manual entitled "Control of relaying" for
more info.
# Removing this setting altogether is not recommended, because there
are many
# unscrupulous people out there who will make use of open relays to
try to
# disguise the source of unsolicited bulk mail.
# sender_host_reject_relay = *
# If you want Exim to support the "percent hack" for all your local
domains,
# uncomment the following line. This is the feature by which mail
addressed
# to x%y na z (where z is one of your local domains) is locally rerouted
to
# x na y and sent on. Otherwise x%y is treated as an ordinary local
part.
# percent_hack_domains=*
end
######################################################################
# TRANSPORTS CONFIGURATION
#
######################################################################
# ORDER DOES NOT MATTER
#
# Only one appropriate transport is called for each delivery.
#
######################################################################
# A transport is used only when referenced from a director or a router
that
# successfully handles an address.
# This transport is used for delivering messages over SMTP
connections.
remote_smtp:
driver = smtp
# This transport is used for local delivery to user mailboxes. By
default
# it will be run under the uid and gid of the local user, and
requires
# the sticky bit to be set on the /var/mail directory. Some systems
use
# the alternative approach of running mail deliveries under a
particular
# group instead of using the sticky bit. The commented options below
show
# how this can be done.
local_delivery:
driver = appendfile
file = /var/spool/mail/${local_part}
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
# This transport is used for handling pipe addresses generated by
alias
# or .forward files. It has a conventional name, since it is not
actually
# mentioned elsewhere in this configuration file. (A different name
*can*
# be specified via the "address_pipe_transport" option if you really
want
# to.) If the pipe generates any standard output, it is returned to
the sender
# of the message as a delivery error. Set return_fail_output instead
if you
# want this to happen only when the pipe fails to complete normally.
address_pipe:
driver = pipe
return_output
# This transport is used for handling file addresses generated by
alias
# or .forward files. It has a conventional name, since it is not
actually
# mentioned elsewhere in this configuration file.
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
# This transport is used for handling file addresses generated by
alias
# or .forward files if the path ends in "/", which causes it to be
treated
# as a directory name rather than a file name. Each message is then
delivered
# to a unique file in the directory. If instead you want all such
deliveries to
# be in the "maildir" format that is used by some other mail
software,
# uncomment the final option below. If this is done, the directory
specified
# in the .forward or alias file is the base maildir directory.
#
# Should you want to be able to specify either maildir or
non-maildir
# directory-style deliveries, then you must set up yet another
transport,
# called address_directory2. This is used if the path ends in "//" so
should
# be the one used for maildir, as the double slash suggests another
level
# of directory. In the absence of address_directory2, paths ending in
//
# are passed to address_directory.
address_directory:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
no_from_hack
prefix = ""
suffix = ""
# maildir_format
# This transport is used for handling autoreplies generated by the
filtering
# option of the forwardfile director. It has a conventional name,
since it
# is not actually mentioned elsewhere in this configuration file.
address_reply:
driver = autoreply
end
######################################################################
# DIRECTORS CONFIGURATION
#
# Specifies how local addresses are handled
#
######################################################################
# ORDER DOES MATTER
#
# A local address is passed to each in turn until it is accepted.
#
######################################################################
# Local addresses are those with a domain that matches some item in
the
# "local_domains" setting above, or those which are passed back from
the
# routers because of a "self=local" setting (not used in this
configuration).
# This director handles aliasing using a traditional /etc/aliases
file.
# If any of your aliases expand to pipes or files, you will need to
set
# up a user and a group for these deliveries to run under. You can
do
# this by uncommenting the "user" option below (changing the user
name
# as appropriate) and adding a "group" option if necessary.
system_aliases:
driver = aliasfile
file = /etc/aliases
search_type = lsearch
# user = exim
# This director handles forwarding using traditional .forward files.
# If you want it also to allow mail filtering when a forward file
# starts with the string "# Exim filter", uncomment the "filter"
option.
# The check_ancestor option means that if the forward file generates
an
# address that is an ancestor of the current one, the current one
gets
# passed on instead. This covers the case where A is aliased to B and
B
# has a .forward file pointing to A.
userforward:
driver = forwardfile
file = .forward
no_verify
check_ancestor
# filter
# This director matches local user mailboxes.
localuser:
driver = localuser
transport = local_delivery
end
######################################################################
# ROUTERS CONFIGURATION
#
# Specifies how remote addresses are handled
#
######################################################################
# ORDER DOES MATTER
#
# A remote address is passed to each in turn until it is accepted.
#
######################################################################
# Remote addresses are those with a domain that does not match any
item
# in the "local_domains" setting above.
# This router routes to remote hosts over SMTP using a DNS lookup
with
# default options.
lookuphost:
driver = lookuphost
transport = remote_smtp
# This router routes to remote hosts over SMTP by explicit IP
address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The
RFCs
# require this facility, which is why it is enabled by default in
Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.
literal:
driver = ipliteral
transport = remote_smtp
end
######################################################################
# RETRY CONFIGURATION
#
######################################################################
# This single retry rule applies to all domains and all errors. It
specifies
# retries every 15 minutes for 2 hours, then increasing retry
intervals,
# starting at 2 hours and increasing each time by a factor of 1.5, up
to 16
# hours, then retries every 8 hours until 4 days have passed since the
first
# failed delivery.
# Domain Error Retries
# ------ ----- -------
* * F,2h,15m; G,16h,2h,1.5; F,4d,8h
end
######################################################################
# REWRITE CONFIGURATION
#
######################################################################
# There are no rewriting specifications in this default configuration
file.
# End of Exim configuration file
po prikazu mail se mi jeste vypise sh: m: command not found.
no a jeste sem se chtel zeptat, co je s mc v debianu, je nejaky divny
a
nepomohla ani rekompilace, porad se mi v pravo ukazuje cerny pruh.
Objevujte Internet s http://www.centrum.cz
Založte si svuj mail na http://mail.centrum.cz
Další informace o konferenci Linux