Padajici XFree86-3.3.6 + ATI Rage Fury (rage128)

izak-conf na albert.fpf.slu.cz izak-conf na albert.fpf.slu.cz
Středa Srpen 16 19:05:33 CEST 2000 

Mam Redhat6.2US, XFree86-3.3.6, pouzivam:XFree86-SVGA-3.3.6-20 ,kde-1.1.2
Graf. karta ATI Rage FURY AGP (rag 128). PIII (pga), MBASUS CSLU2
((integrovana a disable graf karta ) cipset 815E, AGP4, PC133MHz)

Problem:Pokud spustim napr kvt (nebo xterm,konsole ....) a spustim v nem
mc tak to zaprve pri pohybu (nahoru dolu kurzorovima sipkama) zobrazuje
radky z mc po ruzne po obrazovce (mimo terminal) a jeste ktomu se v
terminalu v mc mrsi znaky (nevypadaji jako latinka, ale jako nejake
paznaky dokonce i 3/4 velikosti etc.)

No a druhy zavazny problem je, ze pokud zvecuju okno kde je spusteny mc
tak to vytuhne (vzdy kdyz to udelam vicekrat (chytnu a porad menim
velikost) tak X-y spadnou a vypise to: (viz attchment)
(VYPIS - standartni vypis xsek pri startu; Xreport - to co vypisou X-y po
padu ;gdb - to jes gdb /etc/X11/X /root/core)

Pouzivam rozliseni:1280x1024 pri 32Bit
Pokud ovsem pouziju 24Bit tak vydim tolbar v netscape rernobile.

A jeste pokud nastavim obnovovaci frekvenci kterou umi muj monitor (stejne
jako na ATI all-in-wonder s rage128 (mam jsete jeden pocitac se stejnym
monitorem)) tak vytuhne cela grafika (nic nevidim) (a to dokonce i kdyz
xf86config spusti superprobe) a nic nevydim ani v textovem rezimu (po
takto spustenych X, ani po jejich zhozeni (podle ps spadnou samy)), ale
pocitac finguje (muzu na slepo napsat treba halt)

(jinak to kupodive nedela problemy dokonve i x11perf -a to nezhrouti)
Netusi nekdo cim to muze byt ?

Diky Jarda
------------- další část ---------------
opyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-redhat-linux"...
(no debugging symbols found)...
Core was generated by `/etc/X11/X :0 -auth /root/.Xauthority'.
Program terminated with signal 5, Trasovací/ladící past (SIGTRAP).
Reading symbols from /lib/libm.so.6...done.
Reading symbols from /lib/libdl.so.2...done.
Reading symbols from /lib/libc.so.6...done.
Reading symbols from /lib/ld-linux.so.2...done.
#0  0x80f4645 in R128WaitForVerticalSync ()

------------- další část ---------------
kpanel: waiting for windowmanager
kpanel: ok, commencing initialization
Colortype 6 is rgb/alpha
Caught signal 11.

Server aborting...

eip: 080f4645   eflags: 00013293
eax: 00000000   ebx: 088e9000   ecx: 00000004   edx: 401327d0
esi: 40131000   edi: 02ea18f0   ebp: bffff174   esp: bffff160
Stack: 000001d0 00000000 00000420 0836f180 40131000 bffff1a8 08135ffe 00000e88
       0836f3b0 bffff1c4 00000000 00000067 0000000a 00000406 000002d2 08619f78
       08138e60 fffffde0 bffff384 0813530f 00000067 00000406 00000014 bffff1c4
       0000000a 084cc6b8 084cc5c8 084cc5c8 084cc5c8 084cc5c8 084cc5c8 084cc5c8
Call Trace: 08135ffe 08138e60 0813530f 08134c53 0828e866 0819de88 081870ba
       08199f34 08199fd7 08180e8e 0819a4ac 0829758d 08198381 081b123e 08299db0
       0829a040 08089c7f 081ae155 081ae261 08299f30 08195b83 081921e6 08292ecb
       0829979a 0819ea78 0829088c 081a1532 0814746d 08202018 0819a9a3 081920e8
       081a1155 08082590 080825b1 081a0d10 082f853c 08082590
Code: 8b 03 89 02 83 c3 04 83 c2 04 41 83 f9 07 7e f0 83 c7 f8 eb

Please forward information about this crash to XFree86 na XFree86.org
including the _full_ output of the X server.

To analyse the crash dump, please type

        gdb /etc/X11/X /root/core
        where

and include this output in your report.  Thanks!

xinit:  connection to X server lost.

------------- další část ---------------


XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
      generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us_cz_qwerty)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) SVGA: Graphics device ID: "ATI Rage 128 (generic)"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
Warning: The directory "/usr/share/fonts/default/TrueType" does not exist.
         Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/ISO8859-2/Type1,/usr/share/fonts/ISO8859-2/100dpi,/usr/share/fonts/ISO8859-2/misc,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/100dpi,/usr/share/fonts/default/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/share/fonts/ISO8859-2/75dpi,/usr/X11R6/lib/X11/fonts/Speedo"
(--) SVGA: PCI: ATI Rage 128 RF rev 0, Memory @ 0xf4000000, 0xf3000000, I/O @ 0xd800
(--) SVGA: r128: PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=9000
(--) SVGA: chipset:  r128
(--) SVGA: videoram: 16384k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 250.000 MHz
(**) SVGA: Mode "1280x1024": mode clock = 157.500
(**) SVGA: Mode "1024x768": mode clock = 115.500
(**) SVGA: Mode "800x600": mode clock =  69.650
(**) SVGA: Mode "640x480": mode clock =  45.800
(**) SVGA: Mode "480x300": mode clock =  29.952
(**) SVGA: Mode "400x300": mode clock =  25.000
(**) SVGA: Mode "320x240": mode clock =  15.750
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: r128: ATI Rage 128 RF (AGP)
(--) SVGA: r128: Using hardware cursor
(--) SVGA: r128: Acceleration enabled
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, polytext)
(--) SVGA: XAA: Using 10 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us_cz_qwerty -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'
maudio: Cannot open audio device.
xinit:  connection to X server lost.

Další informace o konferenci Linux