Problem s XFree 4.0.1

[Robert Vojta]

Zdravim,
  tak bych si tipl, ze namate nastaveny HorizSync a VertRefresh vaseho
monitoru a tudiz Vam to vsechny mody smaze, protoze sou out of range ;)
Jinak si nechte vygenerovat ten konfiguracni soubor pomoci 'xf86cfg' nebo
'xf86configure', uz nevim jak se to jmenuje, zruste z neho sekci 'Modes'
protoze to mne z neznameho duvodu neumi proparsovat a nasledne to upravte
podle toho nize uvedeneho (komentare k nemu sou v pravo):

Section "ServerLayout"
  Identifier     "XFree86 Configured"
  Screen      0  "Screen0" 0 0                <- asi budete mit jenom Screen0
  Screen      1  "Screen1" LeftOf "Screen0"   <- ale dve sou lepsi ;) 
  InputDevice    "Mouse0" "CorePointer"
  InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
  RgbPath      "/usr/X11R6/lib/X11/rgb"
  ModulePath   "/usr/X11R6/lib/modules"
  FontPath     "tcp/lucie.ipex:7100"
EndSection

Section "Module"
  Load  "extmod"
  Load  "xie"
  Load  "pex5"
  Load  "glx"
  Load  "dri"
  Load  "GLcore"
  Load  "dbe"
  Load  "record"
#  Load  "Xinerama"
EndSection

Section "InputDevice"
  Identifier  "Keyboard0"
  Driver      "keyboard"
  Option      "XkbLayout" "czsk(us_cz_prog)"
EndSection

Section "InputDevice"
  Identifier  "Mouse0"
  Driver      "mouse"
  Option      "Protocol" "auto"
  Option      "Device" "/dev/mouse"
EndSection

Section "Monitor"
  Identifier   "Monitor0"
  VendorName   "Monitor Vendor"
  ModelName    "Monitor Model"
  HorizSync    31.5 - 38.0          <- tento a radek pod tim tam musi byt
  VertRefresh  50 - 90                 jinak z toho nedostanete > 640x480
EndSection

Section "Monitor"                   <- pokud nemate 2 kary, 2 monitory tak
  Identifier   "Monitor1"              tato sekce tam nebude
  VendorName   "Monitor Vendor"
  ModelName    "Monitor Model"
  HorizSync    31.5 - 96.0          <- to same co vyse
  VertRefresh  50-160
EndSection

Section "Device"
  Identifier  "Card0"
  Driver      "ati"
  VendorName  "ATI"
  BoardName   "Mach64 GU"
  BusID       "PCI:0:11:0"
EndSection

Section "Device"           <- to same, pokud nemate 2 karty, 2 monitory tak
  Identifier  "Card1"         tato sekce tady take nebude
  Driver      "ati"
  VendorName  "ATI"
  BoardName   "Mach64 GV"
  BusID       "PCI:0:9:0"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device     "Card0"
  Monitor    "Monitor0"
  DefaultDepth 16             <- tady si vyberte default depth
  SubSection "Display"        
    Depth     16              <- zde napiste k te barevne hloubce jake chcete
    Modes "800x600"              rozliseni
  EndSubSection
EndSection

Section "Screen"              <- pokud nemate 2 karty, 2 monitory tak tato
  Identifier "Screen1"           sekce tam nebude
  Device     "Card1"
  Monitor    "Monitor1"
  DefaultDepth 16
  SubSection "Display"
    Depth     16
    Modes "1280x1024"
  EndSubSection
EndSection

Section "DRI"
EndSection

  S pozdravem,
    Robert Vojta

-- 

   Robert Vojta aka Penguin (Oo.oO) // ICQ 64746424 // Phone 0603-167911
     http://www.ipex.cz/~vojta                   mailto: vojta na ipex.cz

       GCS d? s+: a-- C++ SL++++ P+ L++++ E--- W+ N+ K w--- O- M- V-
         PS+ PE Y+ PGP++ t 5? X R tv- b+++ DI? D G+ e+ h-- r++ x?