Prestaly fungovat Xwin

[Jiri Zach]

Zdravim,
	na kdysi funkcnim pocitaci prestaly z me neznameho duvodu fungovat X 
windows. Zkousel jsem vsechno mozne, prohledal archiv a nic. System pri 
startu startx vypise toto:

XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.3.8 i586 [ELF]
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "Trio32/Trio64"
(**) S3: Monitor ID: "My Monitor"
(--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "unix/:-1"
(--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xf0000000
(--) S3: chipset:   Trio64V+ rev. 54
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(--) S3: videoram:  2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 51.009 MHz)
(--) S3: Maximum allowed dot-clock: 57.000 MHz
(**) S3: Mode "800x600": mode clock =  40.000
(**) S3: Using sparse 32 bpp.  Color weight: 888
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF0000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 54x54 area at (746,601) for expanding pixmaps
(--) S3: Using 32 planes of 746x54 at (0,601) aligned 8 as font cache
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).

Odstranoval jsem vsemozne locky upgradoval kdeco, znovu instaloval a nic.


Diky