Problem s bootovanim na notebooku (long )

[Jan Trtík]

Dobry den,
mam jeden problem. mam notebook NOTESTAR model 6133.
zkousim na nej nainstalovat linux a moc se mi to nevede :-((.
instalace jako takova probehne uplne normalne ( instaloval sem tam
Redhat 6.1CZ ),ale po nainstalovani se kousne jadro pri bootovani.
zkousel sem jadro rady 2.0.x
- to fungje bez problemu, ale s jadrem 2.2.x to nehodla spolupracovat.
zkousel sem vsechny mozny kombinace nastaveni pri kompilaci a
bezuspesne.
nechapu, jak je to mozny, protoze jadro pouzivany pri instalaci nabehne
uplne normalne, ale jakmile chci pouzit at uz normalni predkompilovany
nebo si ho chci zkompilovat sam, pri bootu to uplne vytuhne pri
detekovani cd mechaniky.
mam tady vypis :

//---------------------------------------------
Linux version 2.2.12-20BOOT (root na porky.devel.redhat.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:02:59
EDT 1999
Detected 365465338 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 159.74 BogoMIPS
Memory: 30724k/32768k available (964k kernel code, 416k reserved, 604k
data, 60k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.

Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeb090
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:3a
PCI: Enabling I/O for device 00:3a
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 32768 bhash 32768)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4309MAT, ATA DISK drive
//----------    tady mi to vytuhne

hdc: CRN-8241B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4309MAT, 4126MB w/0kB Cache, CHS=559/240/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :   811.911 MB/sec
   p5_mmx    :   853.059 MB/sec
   8regs     :   627.126 MB/sec
   32regs    :   356.235 MB/sec
using fastest function: p5_mmx (853.059 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 68000k swap-space (priority -1)
Linux PCMCIA Card Services 3.0.14
  kernel build: 2.2.12-20BOOT #1 Mon Sep 27 10:02:59 EDT 1999
  options:  [pci] [cardbus]
Intel PCIC probe:
  TI 1225 PCI-to-CardBus at bus 0 slot 8, mem 0x68000000, 2 sockets
    host opts [0]: [pwr save] [pci + serial irq] [no pci irq] [lat
168/176] [bus 32/34]
    host opts [1]: [pwr save] [pci + serial irq] [no pci irq] [lat
168/176] [bus 35/37]
    ISA irqs (scanned) = 3,4,7,9,11 status change on irq 11
cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x103f 0x1400-0x140f
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x398-0x39f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
tty02 at 0x03e8 (irq = 3) is a 16550A
//-----------------------------------------------
vypada to na nejaky problem s cd-romkou, ale zkousem sem nejruznejsi
kombinace nastaveni a nic nepomohlo :-((
mate nekdo nejaky napad ??

diky
                Jan Trtik