2.4.3 a compaq smart array

Jan Matis matis na hq.sk
Úterý Duben 10 16:32:55 CEST 2001


prave sa mi vyskytol mensi problem pri prechode z 2.2.18 na 2.4.3
teda konkretne Compaq SmartArray 431 rev A v1.02 (dufam ze som sa v tych
cislach nedomylil)
jednoducho pod 2.4 nenabootuje ...
ako attach posielam dmesg z 2.2.18 (z 2.4 nemam lebo to nedobootovalo )
pri 2.4 to skonci pri inicializacii raidu (aspon tak mi to popisal ten
clovek co to bol rebootovat )

snad niekoho nieco napadne

s pozdravom Jan Matis
------------- další část ---------------
>From jan na YAST_ASK.alert.sk Tue Apr 10 16:23:27 2001
Date: Thu, 16 Nov 2000 05:55:57 +0100
From: jan na YAST_ASK.alert.sk
To: damned na hq.sk

Linux version 2.2.18-SMP (root na SMP_X86.suse.de) (gcc version 2.95.2 19991024 (release)) #1 SMP Sat Jan 20 07:41:17 GMT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 47efc000 @ 00100000 (usable)
 BIOS-e820: 00000000 @ 00000000 (usable)
191MB BIGMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: COMPAQ   Product ID: PROLIANT     APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
    Floating point unit present.
    Machine Exception supported.
    64 bit compare & exchange supported.
    Internal APIC present.
    Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 16
    Floating point unit present.
    Machine Exception supported.
    64 bit compare & exchange supported.
    Internal APIC present.
Bus #0 is PCI   
Bus #3 is PCI   
Bus #9 is ISA   
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 996894 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 1164776k/1179632k available (1756k kernel code, 440k reserved, 12132k data, 100k init, 196588k bigmem)
Dentry hash table entries: 131072 (order 8, 1024k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
Inode hash table entries: 32768 (256k), inode-max: 32768
VFS: Diskquotas version dquot_6.4.0 initialized
256K L2 cache (8 way)
CPU: L2 Cache: 256K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch na atnf.csiro.au)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
per-CPU timeslice cutoff: 50.01 usecs.
CPU1: Intel Pentium III (Coppermine) stepping 06
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 700
Getting LVT1: 400
setup_APIC_clock() called.
calibrating APIC timer ... 
..... 9968118 CPU clocks in 1 timer chip tick.
..... 1329081 APIC bus clocks in 1 timer chip tick.
..... CPU clock speed is 996.8118 MHz.
..... system bus clock speed is 132.9081 MHz.
CPU map: 3
Booting processor 0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Before start apic_write.
Startup point 1.
Waiting for send to finish...
+CPU#0 waiting for CALLOUT
Sending STARTUP #2.
After apic_write.
Before start apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 0.
After Callout 0.
CALLIN, before enable_local_APIC().
setup_APIC_clock() called.
waiting for other CPU calibrating APIC ... done, continuing.
Calibrating delay loop... 1992.29 BogoMIPS
Stack at about fbf91fa4
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
OK.
CPU0: Intel Pentium III (Coppermine) stepping 06
CPU has booted.
Before bogomips.
Total of 2 processors activated (3978.03 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 8
init IO_APIC IRQs
 IO-APIC (apicid-pin) 8-0, 8-5, 8-10, 8-11, 8-16, 8-22, 8-23, 8-24, 8-25, 8-32, 8-33, 8-34 not connected.
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 32.
number of IO-APIC #8 registers: 35.
testing the IO APIC.......................

IO APIC #8......
.... register #00: 08000000
.......    : physical APIC id: 08
.... register #01: 00220011
.......     : max redirection entries: 0022
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 001 01  0    0    0   0   0    0    7    51
 01 000 00  0    0    0   0   0    1    1    59
 02 000 00  0    0    0   0   0    1    1    51
 03 000 00  0    0    0   0   0    1    1    61
 04 000 00  0    0    0   0   0    1    1    69
 05 000 00  1    0    0   0   0    0    0    00
 06 000 00  0    0    0   0   0    1    1    71
 07 000 00  0    0    0   0   0    1    1    79
 08 000 00  0    0    0   0   0    1    1    81
 09 000 00  0    0    0   0   0    1    1    89
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 000 00  0    0    0   0   0    1    1    91
 0d 000 00  1    0    0   0   0    0    0    00
 0e 000 00  0    0    0   0   0    1    1    99
 0f 000 00  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 0FF 0F  1    1    0   1   0    1    1    A9
 12 0FF 0F  1    1    0   1   0    1    1    B1
 13 0FF 0F  1    1    0   1   0    1    1    B9
 14 0FF 0F  1    1    0   1   0    1    1    C1
 15 0FF 0F  1    1    0   1   0    1    1    C9
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
 18 000 00  1    0    0   0   0    0    0    00
 19 000 00  1    0    0   0   0    0    0    00
 1a 0FF 0F  1    1    0   1   0    1    1    D1
 1b 0FF 0F  1    1    0   1   0    1    1    D9
 1c 0FF 0F  1    1    0   1   0    1    1    E1
 1d 0FF 0F  1    1    0   1   0    1    1    E9
 1e 0FF 0F  1    1    0   1   0    1    1    F1
 1f 0FF 0F  1    1    0   1   0    1    1    F9
 20 000 00  1    0    0   0   0    0    0    00
 21 000 00  1    0    0   0   0    0    0    00
 22 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0084, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [1166/0009]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/00
PCI: 00:01 [1166/0009]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/01
PCI->APIC IRQ transform: (B0,I1,P0) -> 19
PCI->APIC IRQ transform: (B0,I2,P0) -> 17
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 64000K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdc:pio, hdd:pio
hda: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
LVM version 0.9  by Heinz Mauelshagen  (13/11/2000)
lvm -- Driver successfully initialized
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: KNI detected, trying cache-avoiding KNI checksum routine
   pIII_kni  :  1995.678 MB/sec
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  2200.275 MB/sec
   p5_mmx    :  2361.819 MB/sec
   8regs     :  1732.026 MB/sec
   32regs    :   997.077 MB/sec
using fastest function: pIII_kni (1995.678 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
Uncompressing...............................................................................done.
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS not found.
VFS: Mounted root (ext2 filesystem).
cpqarray: Device 1011 has been found at 3 20
cpqarray: Device 1000 has been found at 0 8
Compaq SMART2 Driver (v 1.0.11)
Found 2 controller(s)
cpqarray: Finding drives on ida0 (Smart Array 431)
cpqarray ida/c0d0: blksz=512 nr_blks=71122560
cpqarray ida/c0d1: blksz=512 nr_blks=71122560
cpqarray ida/c0d2: blksz=512 nr_blks=142245120
cpqarray: Finding drives on ida1 (Integrated Array)
cpqarray: Starting firmware's background processing
 ida/c0d0: ida/c0d0p1 ida/c0d0p2 ida/c0d0p3 ida/c0d0p4 < ida/c0d0p5 ida/c0d0p6 >
 ida/c0d1:
 ida/c0d2: unknown partition table
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 100k freed
Adding Swap: 1052632k swap-space (priority -1)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw na saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor na valinux.com> 2000/11/15
eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:51:25:CD, IRQ 17.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 010101-034, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).


Další informace o konferenci Linux