Diald HELP!

Pondělí Duben 30 10:52:56 CEST 2001

Dobrey den.

Problem je takovy ze se i nedari nakonfigurovat diald aby fungoval.
Nejdrive jsem nakonfiguroval nejake pripojeni na internet a k tomu jsem
pouzil pppd + wdial, vsechno z redhat 7.0, a ihned to fungovalo bez
zadnych problemu. Pak prisla konfigurace diald ve ktere jsem pouzil jiz
zmineny wvdial ale vysledek zadny. Tady posilam configuracni soubary +
nejake ten log.

Predem dekuju.

Rafael.

=====================
== /etc/diald.conf ==
=====================
connect "/usr/bin/wvdial --chat"
device /dev/ttyS0
connect-timeout 120
redial-timeout 15
start-pppd-timeout 120
mode ppp
speed 115200
modem
lock
crtscts
defaultroute
dynamic
local 192.168.0.1
remote 192.168.0.2
debug 0x007d
accounting-log /var/log/accounting
include /usr/lib/diald/standard.filter

======================
== /etc/wvdial.conf ==
======================
Dialer Defaults]
Modem = /dev/ttyS0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 M0 L0 E1 S0=0 &C1 &D2 S11=55 X3 +FCLASS=0
Phone = 9,0,0971103333
Username = username
Password = password

======================
== /etc/ppp/options ==
======================
lock
debug
modem
crtscts
defaultroute
connect-delay 2000
kdebug 1

====================
== log =============
====================
...
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap0
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap1
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap2
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap3
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap4
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap5
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap6
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap7
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap8
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap9
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap10
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap11
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap12
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap13
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap14
Apr 30 10:38:33 drahlin modprobe: modprobe: Can't locate module tap15
Apr 30 10:38:33 drahlin diald[9328]: Proxy device established on
interface sl0
Apr 30 10:38:33 drahlin diald[9328]: start sl0: SIOCSIFMETRIC: Operation
not supported
Apr 30 10:38:33 drahlin diald[9328]: Diald initial setup completed.
Apr 30 10:38:45 drahlin diald[9328]: Trigger: tcp      
192.168.0.1/1040    195.250.155.29/80
Apr 30 10:38:45 drahlin diald[9328]: Calling site 192.168.0.2
Apr 30 10:38:46 drahlin WvDial: WvDial: Internet dialer version 1.41
Apr 30 10:38:46 drahlin diald[9328]: connector: --> WvDial: Internet
dialer version 1.41
Apr 30 10:38:46 drahlin diald[9328]: connector: --> Initializing modem.
Apr 30 10:38:46 drahlin WvDial: Initializing modem.
Apr 30 10:38:46 drahlin diald[9328]: connector: --> Sending: ATZ
Apr 30 10:38:46 drahlin WvDial: Sending: ATZ
Apr 30 10:38:48 drahlin diald[9328]: connector: ATZ
Apr 30 10:38:48 drahlin diald[9328]: connector: OK
Apr 30 10:38:48 drahlin WvDial: ATZ
Apr 30 10:38:48 drahlin WvDial: OK
Apr 30 10:38:48 drahlin diald[9328]: connector: --> Sending: ATQ0 V1 M0
L0 E1 S0=0 &C1 &D2 S11=55 X3 +FCLASS=0
Apr 30 10:38:48 drahlin WvDial: Sending: ATQ0 V1 M0 L0 E1 S0=0 &C1 &D2
S11=55 X3 +FCLASS=0
Apr 30 10:38:48 drahlin diald[9328]: connector: TQ0 V1 M0 L0 E1C1 &D2
S11=55 XFCLASS=0
Apr 30 10:38:48 drahlin diald[9328]: connector: OK
Apr 30 10:38:48 drahlin WvDial: TQ0 V1 M0 L0 E1C1 &D2 S11=55 XFCLASS=0
Apr 30 10:38:48 drahlin WvDial: OK
Apr 30 10:38:48 drahlin diald[9328]: connector: --> Modem initialized.
Apr 30 10:38:48 drahlin WvDial: Modem initialized.
Apr 30 10:38:48 drahlin diald[9328]: connector: --> Sending: ATDT
9,0,0971103333
Apr 30 10:38:48 drahlin WvDial: Sending: ATDT 9,0,0971103333
Apr 30 10:38:48 drahlin diald[9328]: connector: --> Waiting for carrier.
Apr 30 10:38:48 drahlin WvDial: Waiting for carrier.
Apr 30 10:38:48 drahlin WvDial: ATDT 9,0,0971103333
Apr 30 10:39:30 drahlin diald[9328]: Trigger: tcp      
192.168.0.1/1040    195.250.155.29/80
Apr 30 10:39:39 drahlin diald[9328]: connector: CONNECT 115200 V42bis
Apr 30 10:39:39 drahlin WvDial: CONNECT 115200 V42bis
Apr 30 10:39:39 drahlin diald[9328]: connector: --> Carrier detected. 
Waiting for prompt.
Apr 30 10:39:39 drahlin WvDial: Carrier detected.  Waiting for prompt.
Apr 30 10:39:40 drahlin diald[9328]: connector: User Access Verification
Apr 30 10:39:40 drahlin WvDial: User Access Verification
Apr 30 10:39:40 drahlin diald[9328]: connector: Username:
Apr 30 10:39:40 drahlin diald[9328]: connector: --> Looks like a login
prompt.
Apr 30 10:39:40 drahlin diald[9328]: connector: --> Sending: username
Apr 30 10:39:40 drahlin WvDial: Username:
Apr 30 10:39:40 drahlin WvDial: Looks like a login prompt.
Apr 30 10:39:40 drahlin WvDial: Sending: username
Apr 30 10:39:40 drahlin diald[9328]: connector: username
Apr 30 10:39:40 drahlin WvDial: username
Apr 30 10:39:40 drahlin diald[9328]: connector: Password:
Apr 30 10:39:40 drahlin diald[9328]: connector: --> Looks like a
password prompt.
Apr 30 10:39:40 drahlin diald[9328]: connector: --> Sending: (password)
Apr 30 10:39:40 drahlin WvDial: Password:
Apr 30 10:39:40 drahlin WvDial: Looks like a password prompt.
Apr 30 10:39:40 drahlin WvDial: Sending: (password)
Apr 30 10:39:40 drahlin diald[9328]: connector: Entering PPP mode.
Apr 30 10:39:40 drahlin diald[9328]: connector: Async interface address
is unnumbered (Ethernet0)
Apr 30 10:39:40 drahlin diald[9328]: connector: Your IP address is
194.228.172.113. MTU is 1500 bytes
Apr 30 10:39:40 drahlin WvDial: Entering PPP mode.
Apr 30 10:39:40 drahlin WvDial: Async interface address is unnumbered
(Ethernet0)
Apr 30 10:39:40 drahlin WvDial: Your IP address is 194.228.172.113. MTU
is 1500 bytes
Apr 30 10:39:40 drahlin diald[9328]: connector: --> Looks like a welcome
message.
Apr 30 10:39:40 drahlin WvDial: Looks like a welcome message.
Apr 30 10:39:40 drahlin diald[9328]: Connected to site 192.168.0.2
Apr 30 10:39:40 drahlin diald[9328]: Running pppd (pid = 9354).
Apr 30 10:39:41 drahlin pppd[9354]: pppd 2.3.11 started by root, uid 0
Apr 30 10:39:41 drahlin kernel: ppp_ioctl: set dbg flags to 10000
Apr 30 10:39:41 drahlin kernel: ppp_ioctl: set flags to 10000
Apr 30 10:39:41 drahlin kernel: ppp_ioctl: get unit: 0
Apr 30 10:39:41 drahlin pppd[9354]: Using interface ppp0
Apr 30 10:39:41 drahlin pppd[9354]: Connect: ppp0 <--> /dev/ttyS0
Apr 30 10:39:41 drahlin kernel: ppp_tty_ioctl: set xasyncmap
Apr 30 10:39:41 drahlin kernel: ppp_tty_ioctl: set xmit asyncmap
ffffffff
Apr 30 10:39:41 drahlin kernel: ppp_ioctl: set flags to 10000
Apr 30 10:39:41 drahlin kernel: ppp_ioctl: set mru to 5dc
Apr 30 10:39:41 drahlin kernel: ppp_tty_ioctl: set rcv asyncmap ffffffff
Apr 30 10:39:44 drahlin kernel: ppp: channel ppp0 closing.
Apr 30 10:39:44 drahlin pppd[9354]: Hangup (SIGHUP)
Apr 30 10:39:44 drahlin pppd[9354]: Modem hangup
Apr 30 10:39:44 drahlin pppd[9354]: Connection terminated.
Apr 30 10:39:44 drahlin pppd[9354]: Exit.
Apr 30 10:39:44 drahlin diald[9328]: start sl0: SIOCSIFMETRIC: Operation
not supported
Apr 30 10:39:45 drahlin diald[9328]: start sl0: RTNETLINK answers: No
such process
Apr 30 10:39:45 drahlin diald[9328]: stop ppp0: RTNETLINK answers: No
such process
Apr 30 10:39:45 drahlin kernel: ppp: ppp0 not active
Apr 30 10:39:45 drahlin diald[9328]: stop ppp0: SIOCSIFFLAGS: Device not
configured
Apr 30 10:39:45 drahlin diald[9328]: Disconnected. Call duration 5
seconds.
Apr 30 10:39:45 drahlin diald[9328]: IP transmitted 240 bytes and
received 0 bytes.
Apr 30 10:39:45 drahlin diald[9328]: Closing /dev/ttyS0
Apr 30 10:39:46 drahlin diald[9328]: Delaying 15 seconds before clear to
dial.
...