3com pci 10TBase NETDEV WATCHDOG

Bradman bradman na seznam.cz
Neděle Prosinec 30 18:38:15 CET 2001


/Lukas Cirkva wrote:

Zdravim,

kamos ma problem se sitovkou 3com PCI 10TBase 3c90X a s kernelem 2.4.16.
Shodou okolnosti mam uplne stejny problem se sitovkou stejneho typu na
ruznych kernelech rady 2.4, proto moc neverim na HW problem. Sitovka chvili
funguje a pak vypadne s nasledujici hlasku:

/var/log/messages:
Dec 27 20:03:55 XXX kernel: NETDEV WATCHDOG: eth1: transmit timed out
Dec 27 20:03:55 XXX kernel: eth1: transmit timed out, tx_status 00 status
e000.
Dec 27 20:03:55 XXX kernel:   diagnostics: net 0ec0 media 4810 dma
00000021.
Dec 27 20:03:55 XXX kernel:   Flags; bus-master 1, dirty 37451(11) current
37467(11)
Dec 27 20:03:55 XXX kernel:   Transmit list 03638440 vs. c36384c0.
Dec 27 20:03:55 XXX kernel:   0: @c3638200  length 800000f7 status 000000f7
Dec 27 20:03:55 XXX kernel:   1: @c3638240  length 80000103 status 00000103
Dec 27 20:03:55 XXX kernel:   2: @c3638280  length 800000f7 status 000000f7
Dec 27 20:03:55 XXX kernel:   3: @c36382c0  length 80000103 status 00000103
Dec 27 20:03:55 XXX kernel:   4: @c3638300  length 800000f7 status 000000f7
Dec 27 20:03:55 XXX kernel:   5: @c3638340  length 80000103 status 00000103
Dec 27 20:03:55 XXX kernel:   6: @c3638380  length 800000f7 status 000000f7
Dec 27 20:03:55 XXX kernel:   7: @c36383c0  length 80000103 status 00000103
Dec 27 20:03:55 XXX kernel:   8: @c3638400  length 800000f7 status 000000f7
Dec 27 20:03:55 XXX kernel:   9: @c3638440  length 80000103 status 80000103
Dec 27 20:03:55 XXX kernel:   10: @c3638480  length 800000f7 status
800000f7
Dec 27 20:03:55 XXX kernel:   11: @c36384c0  length 80000103 status
00000103
Dec 27 20:03:55 XXX kernel:   12: @c3638500  length 800000f7 status
000000f7
Dec 27 20:03:55 XXX kernel:   13: @c3638540  length 80000103 status
00000103
Dec 27 20:03:55 XXX kernel:   14: @c3638580  length 800000f7 status
000000f7
Dec 27 20:03:55 XXX kernel:   15: @c36385c0  length 80000103 status
00000103
----------------------

aby to prestalo tak staci ifconfig eth1 down; ifconfig eth1 up. a je zas na
chvili pokoj.

V linux-kernel konferenci se mi nic kloudneho nepodarilo najit (SMP
nevyuziva). :-((

Predem diky za rady,
                                Lukas Cirkva


/Cau,
loadujes dobrej modul pro tvoji kartu? Obcas se stava, ze sitovka s jinym modulem funguje, ale chova se divne.3Comky maj hromadu ruznejch modulu,tak treba vyzkousej jinej.Kdyz jsem podobnou chybu resil ja nedavno, tak se nakonec ukazalo ze je to HARDWAROVA chyba karty. Netvrdim, ze to musi byt i v tomto pripade. Ale rozhodne si nemyslim, ze by to melo co delat s kernelem.

Zdravim.

	Bradman







Další informace o konferenci Linux