Problem s napalovackou

Peter Hanusiak hanusiak na sozo.fns.uniba.sk
Středa Únor 21 18:51:44 CET 2001


Zdravim,

 pokusam sa rozbehat napalovacku MITSUMI 2801TE pod linuxom s kernelom 2.4.1
mam zapnutu podporu pre scsi emulaciu (proste vsetko podla HOWTO) ale napriek
tomu mi nefunguje napalovanie. Pricom aj napalovacka aj medium su ok(vyskusane
pod WIN)
tu uvadzam presny popis co som spustil a co som dostal na vystupe.
podotykam ze som zacinal s buffrom 4MB a stale to bolo take iste.
Proste napalovacka ani nezacne zapisovat.


/usr/bin/cdrecord dev=0,0,0 fs=512k  -v -useinfo speed=1 -dao -dummy -eject -data "/data2/track-01.img"

pregap1: -1
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MITSUMI '
Identifikation : 'CR-2801TE       '
Revision       : '1.10'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
FIFO size      : 524288 = 512 KB
Track 01: data  517 MB        
Total size:     594 MB (58:56.16) = 265212 sectors
Lout start:     595 MB (58:58/12) = 265212 sectors
Current Secsize: 2352
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 94637
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
CDB:  55 10 00 00 00 00 00 00 3C 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 200s
Mode Select Data 00 10 00 00 05 32 12 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
cdrecord: Warning: using default CD write parameter data.
cdrecord: Cannot open new session.
cdrecord: fifo had 8 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.



Další informace o konferenci Linux