xkbcomp + RH6.1CZ

Pátek Leden 5 15:59:10 CET 2001

Dobry den,
mam problem s cestinou v X (RH 6.1CZ). Konkretne mi nefunguji mrtve klavesy.
respektive carka nebo hacek se napise, ale kurzor se posouva, misto aby se
dalsi znak psal na stejnou pozici. Nevite nekdo, kde by mohl byt zakopany
pes? V logu X serveru mam na konci chybove hlaseni od xkbcomp, log
samozrejme prikladam. Myslim, ze to bude mit souvislost, ale nevim kde to
odstranit. Jinak ceske znaky funguji bez problemu vsude, krome tech mrtvol.
Pouzivam WindowMaker. Prepinani klavesnice pomoci ScroollLocku take funguje.

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
      generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: model: "pc102"
(**) XKB: keymap: "xfree86(us_cz_qwertz)" (overrides other XKB settings)
(**) XKB: compat: "group_led"
(**) Mouse: type: MouseSystems, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: samplerate: 60, buttons: 3
(**) SVGA: Graphics device ID: "Primary-Card"
(**) SVGA: Monitor ID: "Primary-Monitor"
(**) FontPath set to "unix/:-1"
(--) SVGA: Revision 0.
(**) SVGA: Using Trident programmable clocks
(**) SVGA: chipset:  tgui9440agi
(--) SVGA: videoram: 2048k
(**) SVGA: Option "linear"
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 45.000 MHz
(**) SVGA: Mode "800x600": mode clock =  38.900
(**) SVGA: Mode "640x480": mode clock =  29.120
(**) SVGA: Virtual resolution set to 800x600
(--) SVGA: Using Linear Frame Buffer at 0x03c00000, Size 2MB
(--) SVGA: Using Graphics Engine.
(--) SVGA: Using 1024 byte display width.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext,
TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w
1 -R/usr/X11R6/lib/X11/xkb -xkm -m us_cz_qwertz -em1 "The XKEYBOARD keymap
compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not
fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'