AOpen AK72 a lm_sensors?

[Michal Dobes]

	Zdravim,

	snazim se uchodit HW monitoring na mabu AOpen AK72 pomoci
lm_sensors-2.5.4. Ale pri pokusu natahnout modul pro LM-75 celej kompl
vytuhne. Testoval jste nekdo zminenou konfiguraci?

Natahuji to timto:
modprobe i2c-viapro
modprobe eeprom
modprobe via686a
modprobe lm75

do /var/log/messages dostanu toto:
i2c-core.o: i2c core module
via2.o version 2.5.4 (20001012)
i2c-core.o: adapter SMBus vt82c596 adapter at 5000 registered as adapter
0.
i2c-viapro.o: vt82c596 bus detected and initialized
sensors.o version 2.5.4 (20001012)
eeprom.o version 2.5.4 (20001012)
i2c-core.o: driver EEPROM READER registered.
i2c-core.o: client [EEPROM chip] registered to adapter [SMBus vt82c596
adapter at 5000](pos. 0).
i2c-core.o: client [EEPROM chip] registered to adapter [SMBus vt82c596
adapter at 5000](pos. 1).
via686a.o version 2.5.4 (20001012)
i2c-core.o: driver VIA 686A registered.
lm75.o version 2.5.4 (20001012)
i2c-core.o: driver LM75 sensor chip driver registered.
i2c-core.o: client [LM75 chip] registered to adapter [SMBus vt82c596
adapter at 5000](pos. 2).

A zde to vytuhne. Pokud eeprom a via686a vynecham, tak to stejne
vytuhne. Pokud vynecham LM-75, tak to jede. Sensors pak vypise:
eeprom-i2c-0-50
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type:            SDRAM DIMM SPD
SDRAM Size (MB):        128

eeprom-i2c-0-54
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter


Mam v tom nacpano:
lm_sensors 2.5.4, i2c 2.5.4, kernel 2.2.16, distribuce RH6.2.cz,
Mabo AOpen AK72, K7/650, 1x 128 MiB DIMM, 2x 3c905, WaveLan 11Mbs,
Moxa C104H/PCI, grafika SiS 86C326.

	Majkl