promise FastTrak100 nevidi hdg

[Cyril Fischer]

Mam desku s on board FastTrak100 ide RAID, kernel 2.4.5
Kernel obsahuje pdc20xxx  driver.
Dmesg rika

PDC20265: IDE controller on PCI bus 00 dev 60
PDC20265: chipset revision 2
ide: Found promise 20265 in RAID mode.
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
    ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
hda: IBM-DTLA-307030, ATA DISK drive
hdc: MEMOREX-482E CD-ROM, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hde: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xac00-0xac07,0xb002 on irq 11
hda: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=29314/64/32,
UDMA(100)
hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63,
UDMA(100)
hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm

tzn linux nevidi ide3. A to bez ohledu na nastaveni array/nearray v
setup kontroleru.
Nasel jsem jakesi drivery na ftp. promise.com, ale jen pro jadro 2.2.x?
Nicmene, rad bych rozhodil alespon sw raid na hde a hdg

Dekuji a zdravim, Cyril F.