Vypinani monitoru v Xech

[Martin Prochazka]

On Mon, 22 Oct 2001 16:48:30 +0200, Lubos Lunak <l.lunak na sh.cvut.cz> wrote:

> > Stejný výsledný efekt - X-y se ani nenastartují.
> > Myslím si, že mezi Option "DPMS" "on" a Option "DPMS"
> > není žádný rozdíl.
> > Najde se ještě nějaká rada...?
> > 
>  
>   Pomoct nasim kristalovym koulim a postnout kousek z logu ? ( /var/log/X* )

Omlouvám se, vstával jsem dnes moc brzo a už moc dlouho sedím u počítače. :-)
Nevím jak jinde, ale na Debianu žádné /var/log/X* není. Nicméně kousek 
z /var/log/gdm/:0.log vypadá asi takto:
<PASTE>
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: IMPS/2, device: /dev/psaux, buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) Mach64: Graphics device ID: "ATI|3D Rage Pro AGP 1X/2X"
(**) Mach64: Monitor ID: "ADI MicroScan 5V"
(--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) XKB: keymap: "xfree86(us_cz_prog)" (overrides other XKB settings)
(**) FontPath set to " ... moc cest k fontum ... "
(--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe1000000, 
Registers @ 0xe0800000, Block I/O @ 0xd800
(--) Mach64: PCI (92) and CONFIG_CHIP_ID (124) don't agree on ChipRev,
        using PCI value
(**) Mach64: Option "power_saver"
(--) Mach64: Card type: AGP
(--) Mach64: Memory type: SDRAM (4)
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 230.000 MHz
(**) Mach64: Mode "1024x768": mode clock =  85.000
(**) Mach64: Mode "800x600": mode clock =  69.650
(--) Mach64: Virtual resolution: 1024x768
(--) Mach64: Video RAM: 8192k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 16 MB aperture @ 0xe1000000
(--) Mach64: Using 4 KB register aperture @ 0xe0800000
(--) Mach64: Ramdac is Internal
(--) Mach64: Ramdac speed: 230 MHz
(--) Mach64: Pixmap cache: 2 256x256 slots, 8 128x128 slots, 32 64x64 slots
(--) Mach64: Font cache: 16 fonts
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm 
-m us_cz_prog -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp 
"> " -eml "Errors from xkbcomp are not fat
al to the X server" keymap/xfree86 compiled/xfree86.xkm'
mach64ProgramClkMach64CT: Warning: Q < 10.66666667
</PASTE>

>   Lubos Lunak

S pozdravem

--Martin Procházka
-----------------------------------------------------------------------
PLCHY  ->  mailto:plchy na mail.muni.cz   http://www.fi.muni.cz/~xprocha6/
-----------------------------------------------------------------------