Vypinani monitoru v Xech

[Martin Prochazka]

On Mon, 22 Oct 2001 17:03:17 +0000 (UTC), David Rohleder <davro na ics.muni.cz> 
wrote:

> > <PASTE>
> > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > (**) stands for supplied, (--) stands for probed/default values
> > (**) Mouse: type: IMPS/2, device: /dev/psaux, buttons: 5
> > (**) Mouse: zaxismapping: (-)4 (+)5
> > (**) Mach64: Graphics device ID: "ATI|3D Rage Pro AGP 1X/2X"
> > (**) Mach64: Monitor ID: "ADI MicroScan 5V"
> > (--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > (--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > (--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > (--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > (--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > (--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > (--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > (--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > (--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > (--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > (--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > (--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > (--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > (**) XKB: keymap: "xfree86(us_cz_prog)" (overrides other XKB settings)
> > (**) FontPath set to " ... moc cest k fontum ... "
> > (--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe1000000, 
> > Registers @ 0xe0800000, Block I/O @ 0xd800
> > (--) Mach64: PCI (92) and CONFIG_CHIP_ID (124) don't agree on ChipRev,
> >         using PCI value
> > (**) Mach64: Option "power_saver"
>                        ^^^^^^^^^^^
> to je to spravne slovo. Ted jeste co rika  xset q   v sekci DPMS.

Jak už jsem psal ve svém prvním příspěvku a toto téma, xset q hlásí:
DPMS (Energy Star):
  Standby: 1200    Suspend: 1800    Off: 2400
  DPMS is Enabled
  Monitor is On

Ale monitor se pořád nevypíná... :-(

> David Rohleder					davro na ics.muni.cz

S pozdravem

--Martin Procházka
-----------------------------------------------------------------------
PLCHY  ->  mailto:plchy na mail.muni.cz   http://www.fi.muni.cz/~xprocha6/
-----------------------------------------------------------------------