USB storage device [deeelsi]
Valter
valter na atlas.cz
Úterý Září 11 21:08:05 CEST 2001
Ako autor povodneho prispevku konstatujem, ze uz mi to
pracuje (rano mudrejsie vecera). Dal som usb-core do
jadra a usb-storage ako modula a zabralo.
Len mi nefunguje (zatial) mazanie (mozno nahoda) karty
z pocitaca.
> VIA moze byt dovodom - ja mam Intela a tieto veci nie su
> uplne rovnake.
Tak, tak. Pre intel by mali byt UHCI a pre VIA OHCI (alebo,
ako sa tomu nadava)
> Mam Olympus C3030 a nic, usb-storage nadava a nakonec hlasi
> pouze errory
IMHO: Olympus C-3030 este nepodporuje usb-storage class,
tak to ani inak dopadnut nemoze. Podla materialov na www
podporuju usb-storage class C2040Z,C3040Z,C4040Z,C-700UZ
tj. novsie modely.
> Muze nekdo kdo ma fotak Olympus poslat jeho dmesg
Soyo D6IBA1 (Dual i440BX) + Olympus C-700UZ + rh-2.4.2-2(-smp)
usb-storage je zavedene :
-------------------------
hub.c: USB new device connect on bus1/2, assigned device number 2
Manufacturer: OLYMPUS
Product: C-700 Ultra Zoom
SerialNumber: 000184500408
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: OLYMPUS Model: C-700UltraZoom Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0
SCSI device sdc: 16000 512-byte hdwr sectors (8 MB)
sdc: Write Protect is off
sdc:<7>usb-storage: queuecommand() called
sdc1
bez usb-storage :
-----------------
hub.c: USB new device connect on bus1/2, assigned device number 2
Manufacturer: OLYMPUS
Product: C-700 Ultra Zoom
SerialNumber: 000184500408
usb.c: USB device 2 (vend/prod 0x7b4/0x105) is not claimed by any active
driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 07b4:0105
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 0mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
------------------------
Ing. Mayer Valter, Senec
Slovak Republic, Europe
Další informace o konferenci Linux