FritZ!X ISDN na 2lines se ihned odpojuje - proč ?

[Ivo Panacek]

On Út, 2002-04-09 at 07:44, n_petr na seznam.cz wrote:
> 
> >>> Jenže tohle je špatně <<<
> "pppd call isdn/contactel":
> Plugin /etc/ppp/plugins/userpass.so loaded.
> Plugin /etc/ppp/plugins/capiplugin.so loaded.
> capiplugin: $Revision: 1.13 $
> capiconn:  1.5
> capiplugin: phase serialconn
> capiplugin: contr=1
> controller 1: listen_change_state 0 -> 1
> contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144
> cipmask=0x0 capimask2=0x0
> controller 1: listen_change_state 1 -> 0
> plci_change_state:0x0 0 -> 1 event=1
> capiplugin: dial 0971101211 (hdlc)
> plci_change_state:0x101 1 -> 2 event=3
> plci_change_state:0x101 2 -> 3 event=6
> ncci_change_state:0x101 0 -> 1 event=1
> ncci_change_state:0x10101 1 -> 3 event=3
> ncci_change_state:0x10101 3 -> 4 event=7
> ncci 0x10101 up
> capiplugin: connected: "313550" -> "0971101211" outgoing
> (pcli=0x101/ncci=0x10101)
> capiplugin: using /dev/capi/0: "313550" -> "0971101211" outgoing
> (pcli=0x101/ncci=0x10101)
> using channel 5
> Using interface ppp0
> Connect: ppp0 <--> /dev/capi/0
> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc12ff5b9> <pcomp> <accomp>]
> capiplugin: phase establish
> capiplugin: "313550" -> "0971101211" outgoing (pcli=0x101/ncci=0x10101):
> charge in units: 1
> rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xc12ff5b9> <pcomp> <accomp>]
> rcvd [LCP ConfReq id=0x2 <mru 1500> <auth chap MD5> <magic 0xb3d40bd2>
> <pcomp> <accomp> <mrru 1506> <endpoint [MAC:00:10:bc:04:43:00]>]
> sent [LCP ConfRej id=0x2 <mrru 1506>]
> rcvd [LCP ConfReq id=0x3 <mru 1500> <auth chap MD5> <magic 0xb3d40bd2>
> <pcomp> <accomp> <endpoint [MAC:00:10:bc:04:43:00]>]
> sent [LCP ConfAck id=0x3 <mru 1500> <auth chap MD5> <magic 0xb3d40bd2>
> <pcomp> <accomp> <endpoint [MAC:00:10:bc:04:43:00]>]
> sent [LCP EchoReq id=0x0 magic=0xc12ff5b9]
> cbcp_lowerup
> want: 2
> capiplugin: phase authenticate
> rcvd [CHAP Challenge id=0x1 <0af606ffaf4ec6c21fe9f876af5c1008>, name = ""]
> No CHAP secret found for authenticating us to
> sent [CHAP Response id=0x1 <ad93c69aec99ad80d1c40767722686b1>, name = ""]
> rcvd [LCP EchoRep id=0x0 magic=0xb3d40bd2]
> rcvd [CHAP Failure id=0x1 ""]
> CHAP authentication failed
> capiplugin: phase terminate
> cbcp_lowerdown
> capiplugin: phase terminate
> sent [LCP TermReq id=0x2 "Failed to authenticate ourselves to peer"]

Tady se piste, ze podle pppd proste nemate zadane jmeno a heslo !
Tak vas samozrejme nemuze overit a odpoji vas.
Nebo ho mate zadane zpusobem, ktery on nerozpoznava.
V tom souboru /etc/ppp/peers/isdn/contactel
byste mel mit neco jako 

plugin userpass.so
user <pripojovaci jmeno>
password <pripojovaci heslo>

Jenze pozor, je to ruzne pro ruzne verze pppd a capipluginu.
Tohle plati pro pppd 2.4.1 a capiplugin zkompilovany
z baliku isdn4k-utils-0112311200.tar.gz.
U vas to muze byt jinak, podivejte se do dokumentace.
(man pppd apod.)

ivo

> Poradí mi někdo prosím, jak udělat to, aby se spojení navázalo a udrželo ?
> 
> Děkuji mockrát, Petr Novák <n_petr na seznam.cz> ... ;-) žabák v linuxu (-;
> 
> ---------------------------------------------------------------------------
> Meta-FAQ (odhlĂĄĹĄenĂ­, archĂ­v, FAQ a dalĹĄĂ­): http://www.linux.cz/mailing-list
> TIP: Ctete FAQ - http://www.phil.muni.cz/~letty/linuxfaq/
>