Scanner UMAX Astra 2200 USB - delší
David Toman
dtoman na wiken.cz
Úterý Duben 9 16:47:25 CEST 2002
Dobré odpoledne přeju,
dnes od rána se snažím rozchodit %Subject na RH 7.2 + všechny poslední
updaty. Nemám možnost tento scanner připojit přes SCSI, pouze USB.
Prohledal jsem na Inetu co se dalo, doporučení jsou různá.
Postupoval jsem podle návodu na
http://www.rauch-domain.de/sane-umax/index.html , to znamená patchoval,
zkompiloval a instaloval poslední verzi SANE.
Dostal jsem se do tohoto stavu:
po připojení scanneru se objeví tato hláška v logu:
Apr 9 15:53:58 fw kernel: hub.c: USB new device connect on bus1/2,
assigned device number 6
Apr 9 15:54:01 fw /etc/hotplug/usb.agent: Setup scanner for USB product
1606/230/100
utilita sane-find-scanner tento scanner zobrazí:
sane-find-scanner: found USB scanner (vendor = 0x1606, product = 0x0230)
at device /dev/usb/scanner0
ALE pomoci scanimage -L dostávám pouze oznámení "No Scanners found"
pokud zkusím rovnou skenovat se zadáním zařízení:
[root na fw log]# export SANE_DEBUG_UMAX=13
[root na fw log]# scanimage -d umax:/dev/usb/scanner0 > /home/toman/pokus
[sanei_debug] Setting debug level of umax to 13.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 33
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch na rauch-domain.de
[umax] reading configure file umax.conf
[umax] option scsi-maxqueue = 2
[umax] option scsi-buffer-size-min = 16384
[umax] option scsi-buffer-size-max = 262144
[umax] option scan-lines = 100
[umax] option preview-lines = 20
[umax] option handle-bad-sense-error = 0
[umax] option execute-request-sense = 0
[umax] option force-preview-bit-rgb = 0
[umax] option lamp-control-available = 0
[umax] option slow-speed = -1
[umax] option care-about-smearing = -1
[umax] option calibration-full-ccd = -1
[umax] option calibration-width-offset = -1
[umax] option calibration-bytes-pixel = -1
[umax] option invert-shading-data = -1
[umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner)
[umax] sanei_config_attach_matching_devices(scsi LinoHell JADE)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office)
[umax] sanei_config_attach_matching_devices(scsi LinoHell Office2)
[umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR2)
[umax] sanei_config_attach_matching_devices(scsi HDM LS4H1S)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-110)
[umax] sanei_config_attach_matching_devices(scsi Nikon AX-210)
[umax] sanei_config_attach_matching_devices(scsi KYE ColorPage-HR5)
[umax] sanei_config_attach_matching_devices(scsi EPSON Perfection600)
[umax] sanei_config_attach_matching_devices(scsi ESCORT "Galleria 600S")
[umax] finished reading configure file
[umax] sane_open
[umax] sane_open: devicename=/dev/usb/scanner0
[umax] attach_scanner: /dev/usb/scanner0, connection_type 0
[umax] attach_scanner: opening usb device /dev/usb/scanner0
[umax] Initializing the PV8630
[umax] PV8630 initialized
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] setting request_scsi_maxqueue = 1 for USB connection
[umax] request_scsi_maxqueue = 1
[umax] request_preview_lines = 20
[umax] request_scan_lines = 100
[umax] handle_bad_sense_error = 0
[umax] execute_request_sense = 0
[umax] scsi_buffer_size_min = 16384
[umax] scsi_buffer_size_max = 262144
[umax] force_preview_bit_rgb = 0
[umax] slow = -1
[umax] smear = -1
[umax] calibration_area = -1
[umax] calibration_width_offset = -1
[umax] calibration_bytespp = -1
[umax] invert_shading_data = -1
[umax] lamp_control_available = 0
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Sending SCSI cmd 0x12 cdb len 6, param len 0, result len 5
a tím končím, tohle to vypíše do logu:
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(1): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(2): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(3): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(4): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(5): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(6): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(7): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(8): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(9): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(10): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(11): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(12): Unable to access minor data
Apr 9 15:01:32 fw kernel: scanner.c: open_scanner(13): Unable to access minor data
Apr 9 15:01:33 fw kernel: scanner.c: open_scanner(14): Unable to access minor data
Apr 9 15:01:33 fw kernel: scanner.c: open_scanner(15): Unable to access minor data
Apr 9 15:01:42 fw kernel: usb_control/bulk_msg: timeout
Apr 9 15:01:42 fw kernel: scanner.c: write_scanner: NAK received.
Apr 9 15:01:42 fw kernel: usb_control/bulk_msg: timeout
podle dokumentace jádra není hláška o timeoutu ničím zvláštním, může se
déle zahřívat lampa. Ovšem NAK podle téhož zdroje znamená, že USB
subsystém není schopen se scannerem komunikovat. Také mě tam mate to
"Unable to access minor data".
Došel jsem zatím k těmto závěrům:
1. nějaký problém s USB přímo na základní desce, ovšem dig. foťák zde chodí
2. scanner není funkční, ovšem po připojení na Maca náhle "ožije"
3. vzájemná nekompatibilita scanneru a PC (Dell OptiPlex G1)
Pokud má někdo tento scanner rozchozený, byl bych velmi vděčen za
postrčení správným směrem.
S pozdravem
D. Toman
--
This message was written using recycled electrons.
--
David Toman
IT Specialist
Wiken International-Prague, s.r.o.
Thunovska 12
118 00 Praha 1
Czech Republic
Tel +420 2 5110 2111
Fax +420 2 5110 2122
Mobile +420 602 693 740
dtoman na wiken.com
Další informace o konferenci Linux