Olympus C1

[Tomas Honzak]

Zdravim,

mam problem s pripojenim dig. fotaku Olympus C1 (USB Mass Storage Class)
podporu pro usb storage i scsi disky mam zakompilovane v jadre, 
detekce probehne v poradku, ale fotak nelze namountovat:

nessijka:/home/tom# mount /dev/sda1 /mnt -t vfat
umount: blokové zařízení /dev/sda1 je neznámé

jadro 2.4.9, debian 3.0

setkal se nekdo s necim podobnym?

diky, th

sestrihany vypis dmesg:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB UHCI at I/O 0x1060, IRQ 10
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF cbfe1f00, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: 1060
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cbfe1f00
usb.c: call_policy add, num 1 -- no FS yet
uhci.c: :USB Universal Host Controller Interface driver
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
uhci.c: suspend_hc
uhci.c: wakeup_hc
uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: kmalloc IF c5b78380, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: OLYMPUS
Product: C-1
SerialNumber: 169521070
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 49
usb-storage: Array length appears to be: 51
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc57ee2b4 Out: 0xc57ee2a0 Int: 0x00000000 (Period 0)
usb-storage: New GUID 07b401020000000169521070
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 1a c0 a8 74 33 c1
usb-storage: Bulk command S 0x55425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned -32 xferred 0/255
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: clearing halt for pipe 0xc0010280
usb-storage: Bulk reset requested
usb-storage: command_abort() called
usb-storage: -- nothing to abort
usb-storage: device_reset() called
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset completed
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: Bulk soft reset completed
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 1a c0 a8 74 33 c1
usb-storage: Bulk command S 0x55425355 T 0x1 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0010280
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: clearing halt for pipe 0xc0010280
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset completed
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: bus_reset() called

-- 
*-----------------------------------------------------------------*
|  Tomáš Honzák -=*=- tomas na honzak.cz -=*=- http://www.honzak.cz  |
*-----------------------------------------------------------------*
 GCS d+(-) s: a-- C++(+++)$ UL++++$ P+++>++++ L+++$>++++ E+ W+++$ 
     N++ o? K? w--- O- M- VMS- PS+ PE++ Y PGP t++ 5? X R tv+ 
     b+(++) DI++ D+ G+ e++>+++ h--- r++>+++ y+>+++
*-----------------------------------------------------------------*