MPlayer vs. SVCD soubor

[Martin Kozusky]

Uz sem na to dosel,
musim dat "mplayer -vc ffmpeg12 (nebo mpeg12) soubor.m2v"

soubor codecs.conf mam novy,
ale i tak navim ze si to [ff]mpeg12 nedosadi samo a musim mu to vnutit :)

Martin

"Martin Kozusky" <kozusky na ics.muni.cz> wrote in message
news:GrDnCu.7x9 na news.muni.cz...
> Dobry den,
> chtel jsem se zeptat, jestli jste nekdo nezkouseli prehravat SVCD soubory
s
> MPlayerem.
>
> mam soubor abc.m2v
>
> kdyz ho chci prehrat, zarve to ze nema kodek. Podle me mam vseny potrebne
> kodeky nainstalovane.
>
> Diky za kazdou radu,
> Martin Kozusky
>
> prikladam vypis MPlayeru:
> -------------------------
> MPlayer CVS-020130-06:00-2.96 (C) 2000-2002 Arpad Gereoffy (viz DOCS!)
> CPU vendor name: GenuineIntel  max cpuid level: 2
> CPU: Intel Celeron A Mendocino/Pentium II Dixon (Type: 6, Stepping: 5)
> CPUflags: Type: 6 MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
> Compiled for x86 CPU with features: MMX
> Reading /root/.mplayer/codecs.conf: 28 audio & 75 video codecs
> Font /root/.mplayer/font/font.desc loaded successfully! (206 chars)
> Using Linux's hardware RTC timing (1024Hz)
> Prehravam /ravers_on_dope-hardcore_vibes__svcd-firestar-mkv.m2v
> Not an URL!
> header block 1 size: 0
> Detekován MPEG-PS formát souboru!
> VIDEO:  MPEG2  480x576  (aspect 2)  25.00 fps  3150.0 kbps (393.8 kbyte/s)
> [V] filefmt:2  fourcc:0x10000002  size:480x576  fps:25.00  ftime:=0.0400
> Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
> CPU vendor name: GenuineIntel  max cpuid level: 2
> CPU: Intel Celeron A Mendocino/Pentium II Dixon (Type: 6, Stepping: 5)
> mp3lib: made decode tables with MMX optimization
> init layer2&3 finished, tables done
> mp3lib: using MMX optimized decore!
> MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
> Channels: 2, copyright: No, original: No, CRC: Yes, emphasis: 0
> AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 28000->176400
> Nemohu nalezt kodek pro video format 0x10000002 !
> *** Pokuste se upgradovat /root/.mplayer/codecs.conf z etc/codecs.conf
> *** Pokud problem pretrva, pak si prectete DOCS/CODECS!
> *** free_stream() called ***
>
> Koncim... (Konec souboru)
> ------------
>
>