CDRW v emulovanom mode scsi
d na d-c.sk
d na d-c.sk
Pondělí Leden 21 20:14:27 CET 2002
;-) To som nenapisal ? uff , takze :
cdrecord -v dev=0,0,0 speed=4 -data iso.raw
tu je log :
xenon:/mnt/david# cdrecord -v dev=0,0,0 speed=8 -data install.iso
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W512EB '
Revision : '2.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 3462144 = 3381 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 639 MB
Total size: 733 MB (72:42.90) = 327218 sectors
Lout start: 734 MB (72:44/68) = 327218 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
speed low: 4 speed high: 8
power mult factor: 2 6
recommended erase/write power: 5
A2 values: 14 A4 4A
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Trying to clear drive status.
cdrecord: Drive needs to reload the media to
return to proper status.
Blocks total: 1166730 Blocks current: 1166730
Blocks remaining: 839512
Starting to write CD/DVD at speed 8 in write mode
for single session.
Last chance to quit, starting real write in 0
seconds. Operation starts.
Waiting for reader process to fill input buffer
... input buffer ready.
Performing OPC...
cdrecord: Input/output error. read track info:
scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00
24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 240s
Writing time: 5.223s
Fixating...
cdrecord: Input/output error. close track/session:
scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00
72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error
- incomplete track in session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 480s
cmd finished after 0.003s timeout 480s
Fixating time: 0.006s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full,
min fill was 100%.
Je niekto tak dobry ze dokaze vycitat z tohoto co sa deje ? ;-( btw,
presne tato napalovacka slapala na MDK 8.0 (v default instalacii) ktoreho som sa uspesne zbavil ..
--
________________________________________________
Daniel Ciprus d na d-c.sk
Jelsova 24 080 01 Presov
S L O V E N S K O
TEL: +421 905 562 370
+421 904 XXX XXX
________________________________________________
Další informace o konferenci Linux