APIC error on CPU1

[Daniel Smolik]

Ondrej Raska wrote:
> 
> > (mozna i desku) mozna je chyba v tom ze vyuzivate SMP jadro na jeden CPU
> 
> Ne mam tam oba procesory. Ale ze zajimave ze kolisa dost napeti:
> sensors:
> 
> VCore 1:   +2.01 V  (min =  +1.80 V, max =  +2.20 V)
> VCore 2:   +1.52 V  (min =  +1.80 V, max =  +2.20 V)
>           ^^^^^^^
> +3.3V:     +3.29 V  (min =  +2.97 V, max =  +3.63 V)
> +5V:       +4.86 V  (min =  +4.50 V, max =  +5.48 V)
> +12V:     +12.62 V  (min = +10.79 V, max = +13.11 V)
> -12V:     -12.70 V  (min = -13.21 V, max = -10.90 V)
> -5V:       -5.61 V  (min =  -5.51 V, max =  -4.51 V)       ALARM
> V5SB:      +5.04 V  (min =  +4.50 V, max =  +5.48 V)
> VBat:      +2.01 V  (min =  +2.70 V, max =  +3.29 V)
> 
> Jinak jsem take cetl, ze by pomohlo pri zavadeni jadra parametr noapic.
> Nevite co by to udelalo a jestli by to pomohlo?
> 
Podle tohohle bych rekl, ze tam mate spis tu chybu s kolisanim napajeni.

					Dan


-- 
Daniel Smolik
Sitour spol. s r.o.
mailto:marvin na sitour.cz
"Micro$oft have performed an illegal operation and will be shut down"