isdnctrl dial ippp0
Patrik Modesto
mody na quick.cz
Neděle Leden 27 20:16:45 CET 2002
Ahoj všem.
Mám potíže s připojením přes ISDN modem který podporuje CAPI. Nastavení
a volání přes pppd s využitím pppdcapiplugin chodí, ale nejde spojovat
kanály. Tak jsem nastavoval isdn4linux a nastavil jsem do device.ippp0 a
ipppd.ippp0 stejné parametry jako pro capiplugin, ale nepřipojím se.
Modemy se spojí, ale v syslogu mám (viz dole). Já tomu rozumím tak, že moje
strana odmítá přijmout PAP auth. req. A nevím jak ji donutit, aby ho
přijala. pap-secrets jsou nastavený dobře, protože na net se jinak
dostanu. Otázka teda zní, jak donutit isdn4linux aby přijalo PAP auth.
req.??
Dík Patrik
Jan 27 20:09:44 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5a <auth
pap> <magic 0xa946179e> <MPmrru 1524> <MPdiscr: 0x1 [ 41 53 35 38 44 45
4c 31 ]>]
Jan 27 20:09:44 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5a <auth
pap> <MPmrru 1524>]
Jan 27 20:09:44 mody ipppd[2000]: rcvd [0][LCP ConfAck id=0x1 <mru 1500>
<magic 0x4638f79f> <pcomp> <accomp>]
Jan 27 20:09:44 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5b <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:44 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5b <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5c <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5c <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5d <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5d <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5e <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5e <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x5f <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x5f <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x60 <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x60 <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x61 <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x61 <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x62 <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x62 <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x63 <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x63 <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP ConfReq id=0x64 <auth
pap> <magic 0xa946179e> <MPdiscr: 0x1 [ 41 53 35 38 44 45 4c 31 ]>]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP ConfRej id=0x64 <auth
pap>]
Jan 27 20:09:45 mody ipppd[2000]: rcvd [0][LCP TermReq id=0x65]
Jan 27 20:09:45 mody ipppd[2000]: sent [0][LCP TermAck id=0x65]
------------- další část ---------------
# Options file for ipppd.
# ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any other
# config file. Everything has to be in here.
# "peer" is the name for our syncppp partner.
# STANDARD OPTIONS
debug # enable debugging
#kdebug X # set kernel debugging level to X
#nodetach # (no) fork to the background
#callback X # ask for callback (parameter X ?)
#lock # create a lock file for device
#domain X # add domain X to a given hostname
#pidfile X # save pid in file X
#call X # take options from privileges file (???)
#idle X # idle time limit (seconds)
#holdoff X # holdoff time limit (seconds)
#maxconnect X # set maximum connection time (in seconds ?)
#+mp # enable multi line ppp
#+pwlog # log password (WARNING: possible security hole)
#nomagic # magic number negotiation
# ppp handshake : tuning
#silent # don't even try to initiate the connection
#passive # wait for the peer to initiate the connection
#lcp-echo-failure X # consecutive echo failures
#lcp-echo-interval X # time for lcp echo events
#!lcp-restart 1 # Set timeout for LCP
#lcp-max-terminate X # Set max #xmits for term-reqs
#lcp-max-configure X # Set max #xmits for conf-reqs
#lcp-max-failure X # Set max #conf-naks for LCP
# AUTHENTICATION
name <tady je opravdové jméno> # set local name for auth XXX_
#user X # set name for auth with peer; default is value for name
#usehostname # use hostname for auth
#remotename X # set remote name for auth
noauth # (dont) require peer (the other) to auth
#require-pap # allow only pap authentication (dialin only)
#require-chap # allow only chap authentication (dialin only)
#login # use system password database for pap
#papcrypt # pap passwords are encrypted
# AUTHENTICATION TUNING
#pap-restart X # Set retransmit timeout for PAP
#pap-max-authreq X # Set max #xmits for auth-reqs
#pap-timeout X # Set time limit for peer PAP auth.
#chap-restart X # Set timeout for CHAP
#chap-max-challenge X # Set max #xmits for challenge
#chap-interval X # Set interval for rechallenge
# COMPRESSION
#noaccomp # address compression on/off
#nopcomp # protocol field compression on/off
#novj # van jacobsen compression on/off
#novjccomp # van jacobsen connection-ID compression on/off
#vj-max-slots X # tune maximum vj header slots
#nobsdcomp # bsd compression on/off
#nodeflate # deflate compression on/off
#nopredictor1 # predictor1 compression in/off
noccp # compression negotation on/off
nolzs # LZS compression off (not yet supported fully)
# IP NETWORKING
#noip # (do not) disable ip transfer
#X:Y # (do not) set local ip to X, remote ip to Y
#!noipdefault # do not use name for default ip addr
#useifip # (do) use ip addresses from interface
#usefirstip # (do) use first ip from auth file for remote
#!netmask 255.255.255.255 # do set netmask, 255.255.255.255 for pointopoint
defaultroute # (do not) set default route
#nohostroute # do not set host route
#proxyarp # (do not) set an proxy arp entry
#mru X # (do not) set maximum size of receive units to X
#default-mru # (do not) enable mru negotation
#mtu 1500 # do set max size of transmit units (1500 is OK)
#useifmtu # (do not) use mtu from interface
ipparam WorldOnline # (do not) set ip parameters in script X
#ms-dns X # (do not) set dns addr for the peers use (dialin only)
#ms-wins X # (do not) wins address for the peers use (dialin only)
#ms-get-dns # (do not) accept peers suggestion of dns addr (dialout)
#set_userip # (do not) define valid ip addrs in /etc/ppp/useriptab
#ipcp-restart X # Set timeout for IPCP
#ipcp-max-terminate X # Set max #xmits for term-reqs
#ipcp-max-configure X # Set max #xmits for conf-reqs
#ipcp-max-failure X # Set max #conf-naks for IPCP
ipcp-accept-local # Accept peer's address for us
ipcp-accept-remote # Accept peer's address for it
# IPX NETWORKING
noipx # en/disable ipx
#ipx-network X # IPX network number
#ipxcp-accept-network # Accept peer netowrk
#ipx-node X # IPX node number
#ipxcp-accept-local # Accept our address
#ipxcp-accept-remote # Accept peer's address
#ipx-routing X # IPX routing proto number
#ipx-router-name X # IPX router name
#ipxcp-restart X # Set timeout for IPXCP
#ipxcp-max-terminate X # max #xmits for term-reqs
#ipxcp-max-configure X # max #xmits for conf-reqs
#ipxcp-max-failure X # max #conf-naks for IPXCP
------------- další část ---------------
A non-text attachment was scrubbed...
Name: [žádný popis není k dispozici]
Type: application/pgp-signature
Size: 232 bytes
Desc: [žádný popis není k dispozici]
URL: <http://www.linux.cz/pipermail/linux/attachments/20020127/9cbaefb3/attachment.sig>
Další informace o konferenci Linux