OpenSSH_3.1p1, scp stalled

[Zdenek Prantl]

Zdravim,
mam problem s scp v OpenSSH_3.1p1. Nedari se mi prenest soubor vetsi jak
90112 B.  Jakmile je soubor vetsi nez uvedena velikost, prenos "vytuhne" a
zustane ve stavu "stalled". 

Na strane klienta je OpenSSH_3.1p1 (na RH6.2cz), na strane serveru je sshd
od F-secure "SSH Version 2.0.11" (http://www.ssh.fi/). Dokud byl i klient od
F-secure, bylo vse OK. Nyni mi funguje jen prenos smerem na server, zpet mi
to tuhne u velkych souboru. Zkousel jsem hledat nejake reseni, ale neuspel
jsem. 

prikladam i vypis scp -v

Executing: program /usr/local/bin/ssh host <IP>, user prantl, command scp -v
-f soubor.tar.gz
OpenSSH_3.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090603f
debug1: Reading configuration data /etc/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be
trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 101 geteuid 0 anon 1
debug1: Connecting to <IP> [<IP>] port <port>.
debug1: temporarily_use_uid: 101/100 (e=0)
debug1: restore_uid
debug1: temporarily_use_uid: 101/100 (e=0)
debug1: restore_uid
debug1: Connection established.
debug1: read PEM private key done: type DSA
debug1: read PEM private key done: type RSA
debug1: identity file /home/prantl/.ssh/identity type 0
debug1: identity file /home/prantl/.ssh2/id_rsa type -1
debug1: identity file /home/prantl/.ssh2/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version 2.0.11
(non-commercial)
debug1: match: 2.0.11 (non-commercial) pat 2.0.11*,2.0.12*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client 3des-cbc hmac-md5 none
debug1: kex: client->server 3des-cbc hmac-md5 none
debug1: dh_gen_key: priv key bits set: 195/384
debug1: bits set: 525/1024
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Host '<IP>' is known and matches the DSA host key.
debug1: Found key in /home/prantl/.ssh/known_hosts:8
debug1: bits set: 494/1024
debug1: ssh_dss_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: buggy server: service_accept w/o service
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password
debug1: next auth method to try is publickey
debug1: try privkey: /home/prantl/.ssh2/id_rsa
debug1: try pubkey: /home/prantl/.ssh2/id_dsa
debug1: input_userauth_pk_ok: pkalg ssh-dss blen 433 lastkey 0x80fe958 hint
2
debug1: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/home/prantl/.ssh2/id_dsa':
debug1: read PEM private key done: type DSA
debug1: ssh-userauth2 successful: method publickey
debug1: fd 6 setting O_NONBLOCK
debug1: fd 8 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: Sending command: scp -v -f soubor.tar.gz
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 10000 rmax 32768
soubor.tar.gz   0% |                             |     0       --:-- ETAS
ending file modes: C0655 849183 soubor.tar.gz
soubor.tar.gz  10% |**                           | 90112     - stalled -


budu vdecen za kazdou radu.

	Diky
--
  Zdenek Prantl
  e-mail:zdenek.prantl na pvt.cz