Aver TV Studio a lirc moduly - problem

Ales Rygl rygl na mybox.cz
Středa Listopad 20 09:48:54 CET 2002


Zdravim,

        zapasim uz druhy vecer s touhle kartou. Obraz po rozchozeni Xkek
 v PAL rozliseni je perfektni, citlivost vyborna, radio taky ok. Problem je
 ale s dalokovym ovladanim. Pod RH 8.0 standardni kernel 2.4.18 a licr
 0.6.6 prelozim moduly pro tuhle kartu (type 13/41), ale moduly lirc_gp
io.o a lirc_dev.o nejdou do jadra natahnout - unresolved symbols. Zkousel 
jsem i starsi verze lirc, ale nic. 
        Rad bych pochopil, jak je to vlastne s i2c moduly, protoze se jich na
tahuje docela dost a poradne nevim, jake jsou mezi nimi a mezi lirc
        
/etc/modules.conf

options i2c-core i2c-debug=1
options i2c-algo-bit bit_test=1
alias char-major-81 videodev
alias char-major-81-0 bttv
# options
pre-install bttv modprobe -k msp3400;modprobe -k tuner
options bttv radio=1 card=41 no_overlay=0 gbuffers=4
options tuner type=5

/var/log/messages

Nov 20 06:42:02 tux kernel: Linux video capture interface: v1.00
Nov 20 06:42:02 tux kernel: i2c-core.o: i2c core module
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o: i2c bit algorithm module
Nov 20 06:42:02 tux kernel: i2c-core.o: driver i2c msp3400 driver 
registered.
Nov 20 06:42:02 tux kernel: i2c-core.o: driver i2c TV tuner driver 
registered.
Nov 20 06:42:02 tux kernel: bttv: driver version 0.7.91 loaded
Nov 20 06:42:02 tux kernel: bttv: using 4 buffers with 2080k (8320k total) 
for capture
Nov 20 06:42:02 tux kernel: bttv: Host bridge is Intel Corp. 82815 815 
Chipset Host Bridge and Memory Controller Hub
Nov 20 06:42:02 tux kernel: bttv: Bt8xx card found (0).
Nov 20 06:42:02 tux kernel: PCI: Found IRQ 10 for device 02:0b.0
Nov 20 06:42:02 tux kernel: PCI: Sharing IRQ 10 with 02:0b.1
Nov 20 06:42:02 tux kernel: bttv0: Bt878 (rev 17) at 02:0b.0, irq: 10, 
latency: 66, memory: 0x40400000
Nov 20 06:42:02 tux kernel: bttv0: detected: AVerMedia TVPhone98 [card=41], 
PCI subsystem ID is 1461:0003
Nov 20 06:42:02 tux kernel: bttv0: using: BT878(AVerMedia TVPhone 98) 
[card=41,insmod option]
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 
-- testing...
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o:1 scl: 1  sda: 0
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o:2 scl: 1  sda: 1
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o:3 scl: 0  sda: 1
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o:4 scl: 1  sda: 1
Nov 20 06:42:02 tux kernel: i2c-algo-bit.o: bt848 #0 passed test.
Nov 20 06:42:03 tux kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005]
Nov 20 06:42:03 tux kernel: tuner: chip found @ 0xc2
Nov 20 06:42:03 tux kernel: bttv0: i2c attach [client=Philips PAL,ok]
Nov 20 06:42:03 tux kernel: i2c-core.o: client [Philips PAL] registered to 
adapter [bt848 #0](pos. 0).
Nov 20 06:42:03 tux kernel: i2c-core.o: adapter bt848 #0 registered as 
adapter 0.
Nov 20 06:42:03 tux kernel: bttv0: Avermedia eeprom[0x0a97]: tuner=5 
radio:yes remote control:yes
Nov 20 06:42:03 tux kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not 
found
Nov 20 06:42:03 tux kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not 
found
Nov 20 06:42:03 tux kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not 
found
Nov 20 06:42:03 tux insmod: Module i2c-core loaded, with warnings
Nov 20 06:42:03 tux kernel: tvaudio: TV audio decoder + audio/video mux 
driver
Nov 20 06:42:03 tux insmod: Module i2c-algo-bit loaded, with warnings
Nov 20 06:42:03 tux kernel: tvaudio: known chips: 
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 
(P
V951)
Nov 20 06:42:03 tux insmod: Module bttv loaded, with warnings
Nov 20 06:42:03 tux kernel: i2c-core.o: driver generic i2c audio driver 
registered.
Nov 20 06:42:03 tux kernel: tvaudio: found tda9840
Nov 20 06:42:03 tux kernel: bttv0: i2c attach [client=tda9840,ok]
Nov 20 06:42:03 tux kernel: i2c-core.o: client [tda9840] registered to 
adapter [bt848 #0](pos. 1).
Nov 20 06:42:03 tux kernel: bttv0: registered device video0
Nov 20 06:42:03 tux kernel: bttv0: registered device vbi0
Nov 20 06:42:03 tux kernel: bttv0: registered device radio0
Nov 20 06:42:03 tux kernel: bttv0: PLL: 28636363 => 35468950 ... ok


        Diky za radu ci odkaz. Googloval jsem uz dost, mam tuseni, ze se neja
k musi priohnout jadro, ale zatim jsem zadne patche nezkousel...

Ales Rygl




-------------------------------
Linux is like a wigwam:
no windows, no gates and apache inside
-------------------------------


Další informace o konferenci Linux