externi diskove pole

[Mošnička Roman]

nasel.
Zkuste prikaz
dmesg | more
a tam byste to mel byt schopen najit

dmesg jsem uz take zkousel - to mi vypise toto
qla2x00: Found  VID=1077 DID=2200 SSVID=1077 SSDID=2
scsi1: Found a QLA2200  @ bus 1, device 0x5, irq 3, iobase 0xc400
scsi(1): Configure NVRAM parameters...
scsi(1): Verifying loaded RISC code...
scsi(1): Verifying chip...
scsi(1): LIP reset occurred
scsi(1): Waiting for LIP to complete...
scsi(1): LOOP UP detected
scsi1: Topology - (F_Port), Host Loop address 0xffff
scsi1: Topology - (F_Port), Host Loop address 0xffff
scsi-qla0-adapter-port=210000e08b069554\;
scsi-qla0-tgt-0-di-0-node=50001fe1000bfcf0\;
scsi-qla0-tgt-0-di-0-port=50001fe1000bfcf1\;
scsi-qla0-tgt-0-di-0-control=00\;
scsi-qla0-tgt-0-di-0-preferred=ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\;
scsi-qla0-tgt-0-di-1-node=50001fe1000bfcf0\;
scsi-qla0-tgt-0-di-1-port=50001fe1000bfcf2\;
scsi-qla0-tgt-0-di-1-control=80\;
scsi1 : QLogic QLA2200 PCI to Fibre Channel Host Adapter: bus 1 device 5 irq 3
        Firmware version:  2.01.38, Driver version 5.38.9-fo
scsi: unknown type 12
  Vendor: DEC       Model: HSG80CCL          Rev: V86F
  Type:   Unknown                            ANSI SCSI revision: 02
scsi(1:0:0:0): Enabled tagged queuing, queue depth 16.
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12

to mi nic nerika - mozna jsem ale slepej ....

rm