lm_sensors a VIA VT 82C586B Apollo ACPI

[Vaclav Dvorsky]

Jan Houstek wrote:
 >>> i2c-proc vam nestaci, ten slouzi pouze ke zobrazovani prectenych
 >>> dat v /proc, odkud je cte programek sensors. Potrebujete jeste
 >>> modul(y) na samotne cteni senzoru. Jake, to vam muze poradit
 >>> treba sensors-detect.
 >>
 >> Take mi uz predtim poradil, mam v /etc/modules.conf alias
 >> char-major-89 i2c-dev
 >>
 >> ale porad je vysledek No sensors... Pomohl by mi upgrade BIOSu,
 >> nove jadro nebo lm_sensors?
 >
 >
 > co presne vam rekne sensors-detect ?
 >

  We can start with probing for (PCI) I2C or SMBus adapters.
  You do not need any special privileges for this.
  Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-via' for device 00:07.3: VIA Technologies VT 82C586B
Apollo ACPI
Probe succesfully concluded.

  We will now try to load each adapter module in turn.
Load `i2c-via' (say NO if built into your kernel)? (YES/no): YES
Module loaded succesfully.
  Do you now want to be prompted for non-detectable adapters? (yes/NO): NO
  To continue, we need module `i2c-dev' to be loaded.
  If it is built-in into your kernel, you can safely skip this.
  i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
  Module loaded succesfully.

  We are now going to do the adapter probings. Some adapters may hang 
halfway
  through; we can't really help that. Also, some chips will be double
detected;
  we choose the one with the highest confidence value in that case.
  If you found that the adapter hung after probing a certain address, 
you can
  specify that address to remain unprobed. If you have a PIIX4, that often
  includes addresses 0x69 and/or 0x6a.

Next adapter: VIA i2c (Bit-shift algorithm)
Do you want to scan it? (YES/no/selectively): YES

  Some chips are also accessible through the ISA bus. ISA probes are
  typically a bit more dangerous, as we have to write to I/O ports to do
  this.  Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
   Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
   Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
   Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
   Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
   Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
   Trying general detect... Failed!
Probing for `VIA Technologies VT 82C686 Integrated Sensors'
   Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
   Trying address 0x0290... Failed!

  Now follows a summary of the probes I have just done.
  Just press ENTER to continue:


  I will now generate the commands needed to load the I2C modules.
  Sometimes, a chip is available both through the ISA bus and an I2C bus.
  ISA bus access is faster, but you need to load an additional driver module
  for it. If you have the choice, do you want to use the ISA bus or the
  I2C/SMBus (ISA/smbus)? ISA

WARNING! If you have some things built into your kernel, the
below list will contain too many modules. Skip the appropriate ones!
To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
# I2C chip drivers
#----cut here----

To make the sensors modules behave correctly, add these lines to either
/etc/modules.conf or /etc/conf.modules:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
[root na Akira root]# sensors
No sensors found!

Tu zmenu v /etc/modules.conf uz mam drive zavedenou, ale k vysledkum
mereni se stale nemohu dostat. Zkousel jsem i jine kombinace odpovedi,
casto to vyhazovalo chyby a temer vzdycky to skoncilo doporucenim pridat
alias char-major-89 i2c-dev do modules.conf

-- 
Vaclav Dvorsky
http://hufhendr.spok.cz
emajl: hufhendr na atlas.cz, charset=iso-8859-2 (win1250)
tel: +420 608 021530, ICQ: 10896858, PGP: 0xD38E2CA7
BBS: +420 2 74782420 (non-stop)