lm_sensors a KT333 - LONG

[yanek]

On Pá, 11 říj 2002, trnkar1.ete na mail.cez.cz wrote:
# Díky vyzkousím, s parametrem force jsem si také (dle doc k lm_sensors)
# hrál, ale tuto kombinaci jsem myslím nezkousel. Vyzkousím. Podle me jde
# zrovna o to správné pouzití tohoto parametru, neb podle vsecho je ten chip
# spravne detekován. Kdyz spoustíte sensors, poustíte je s nejakým parametrem
# nebo pouze 'sensors'? Díky RT

[root na enigma root]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1:   +1.74 V  (min =  +4.08 V, max =  +4.08 V)              
VCore 2:   +0.04 V  (min =  +4.08 V, max =  +4.08 V)              
+3.3V:     +3.26 V  (min =  +2.97 V, max =  +3.63 V)              
+5V:       +4.94 V  (min =  +4.50 V, max =  +5.48 V)              
+12V:     +12.31 V  (min = +10.79 V, max = +13.11 V)              
-12V:     -12.70 V  (min = -13.21 V, max = -10.90 V)              
-5V:       -5.17 V  (min =  -5.51 V, max =  -4.51 V)              
V5SB:      +5.34 V  (min =  +4.50 V, max =  +5.48 V)              
VBat:      +3.32 V  (min =  +2.70 V, max =  +3.29 V)       ALARM  
fan1:     5152 RPM  (min = 3000 RPM, div = 2)                     
fan2:        0 RPM  (min = 3000 RPM, div = 2)                     
fan3:        0 RPM  (min = 3000 RPM, div = 2)                     
temp1:     +36.0°C  (limit =  +60°C, hysteresis = +127°C) sensor =
thermistor           
temp2:       +46°C  (limit =  +60°C, hysteresis =  +50°C) sensor =
thermistor           
temp3:      +256°C  (limit = +256°C, hysteresis = +256°C) sensor =
thermistor           
vid:      +13.00 V
alarms:   Chassis intrusion detection                             
beep_enable:
          Sound alarm disabled
          

-- 
yanek <yanek na bofh.cz>
http://ya.bofh.cz/
-----------------------------------------------------------------
"Maybe one day you will learn that your way is not the only way."
                                        Opher [StarGate: The Nox]