RH8: Problem se zvukem a sensory

[Judy]

No zvuk uz jsem nejak "rozbehal". Drive jsem to zkousel funkcnost zvuku tim stylem, ze jsem si prehraval mp3-ky v xmms. Pak jsem zjistil ze chyba byla prave v onom xmms (ten byl od instalace). Soubory *.ogg mi sly vsechny vpohode, mp3 s mensimi obtizemi po nainstalovani alsaplayeru a mpg123, ale ono xmms se mi nedari rozbehat tak aby mi ty mp3-ky a wavy prehraval pekne ciste (stale mi v nich praska, nebo spise to praskani obcas prerusuje skutecny zvuk mp3-ky), soubory ogg mi prehrava pekne.
  Nevite nekdo co s tim??

Diky
  Jiri Caha


On Sun, 20 Oct 2002 16:25:47 GMT
Judy <xthovt na seznam.cz> wrote:
> Supeeeeeeeeer diky moc funguje to squele
> a stim zvukem by jsi nedokazal poradit??
> 
>      Jiri Caha
> 
> 
> On Sun, 20 Oct 2002 15:57:25 +0000 (UTC)
> > Judy wrote:
> > 
> > >rpm jsem nainstaloval ( i na novou instalaci RH8.0) a presto mi to nejede
> > >tady je kus vypisu sensors-detect:
> > >
> > >Some chips are also accessible through the ISA bus. ISA probes are
> > > typically a bit more dangerous, as we have to write to I/O ports to do
> > > this.  Do you want to scan the ISA bus? (YES/no):
> > >Probing for `National Semiconductor LM78'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `National Semiconductor LM78-J'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `National Semiconductor LM79'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `Winbond W83781D'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `Winbond W83782D'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `Winbond W83627HF'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `Winbond W83697HF'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `Silicon Integrated Systems SIS5595'
> > >  Trying general detect... Failed!
> > >Probing for `VIA Technologies VT82C686 Integrated Sensors'
> > >  Trying general detect... Failed!
> > >Probing for `ITE IT8705F / IT8712F / SiS 950'
> > >Character in "C" format wrapped at /usr/sbin/sensors-detect line 963.
> > >  Trying address 0x0290... Failed!
> > >Probing for `IPMI BMC KCS'
> > >  Trying address 0x0ca0... Failed!
> > >Probing for `IPMI BMC SMIC'
> > >  Trying address 0x0ca8... Failed!
> > >  
> > >
> > hmmmm
> > 
> > [root na nest sysconfig]# cat /etc/sysconfig/lm_sensors
> > MODULE_0=i2c-isa
> > MODULE_1=w83781d
> > 
> > 
> > modprobe i2c-isa
> > modprobe w83781d
> > 
> > -- 
> > email : marian.kyral na tiscali.cz
> > ICQ#  : 62938937
> > WWW   : mkyral.web.worldonline.cz
> > 
> >         checking for intelligent life... not found
> >                           The Gimp 1.2 (configure)
> > 
> > 
> > 
> > ---------------------------------------------------------------------------
> > TIP: Prectete si Linux Documentation Project: http://www.linux.cz/linuxdoc/
> >