serial IR reciever

[Patrik Skovajsa]

Dakujem za odpovede,

>lirc_serial: port 03f8 already in use, proceeding anyway
>lirc_serial: compile the serial port driver as module and
>lirc_serial: make sure this module is loaded first

vid http://www.linuxzone.cz/index.phtml?ids=7&idc=260

Pandor

  Podla tohoto navodu som postupoval od sameho zaciatku len s tym rozdielom ze
  som
  nepouzil Lirc zo zdrojakov ale mdk rpm.

>Co treba setserial /dev/ttySx uart none

Pouzil som teda setserial, ale hlasenie programov mode2 a irrecord sa 
nezmenili:

[root na cracken_house cracken]# setserial /dev/ttyS0 uart none
Po natiahnuti modulu lirc_serial Dmesg zahlasil:
lirc_serial: auto-detected active low receiver
potom:
[root na cracken_house cracken]# lircd start
[root na cracken_house cracken]# mode2
This program is only intended for receivers supporting the pulse/space layer.
Note that this is no error, but this program simply makes no sense for your
receiver.
[root na cracken_house cracken]# irrecord serial

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus(lirc na bartelmus.de)

irrecord: could not init hardware (lircd running ? --> close it, check
permissions)
[root na cracken_house cracken]# irrecord serial

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus(lirc na bartelmus.de)

irrecord: could not init hardware (lircd running ? --> close it, check
permissions)
Vysledok je stale rovnaky. Neskusal niekto skonstruovat ir reciever z 
linuxzone 
a prevadzkovat ho v Mandraku 9, pricom nainstaloval Lirc z mdk rpm.

Dakujem

S pozdravom Cracken