dva monitory
SadlO
kunes14 na oag.cz
Pondělí Duben 21 16:35:08 CEST 2003
Jen tak tipnu (kdysi jsem to taky zkousel ale nemel jsem moc casu) Vse
je potreba nastavit v konf. souboru X mam dojem ze se musi zalozit sekce
2 monitoru a 2 grafik a ty bejt v jednom Layoutu.
Pak taky kdyz se mluvi o 2 monitorech tak se mluvi o programu xinerama
jestli se nepletu. Vse je mozne nalezt v archivu.
Prikladam ukazkovi konfiguracni soubor, ktery byl u ovladacu nVidie
(melo by ho stacit jen upravit)
Zdenek Materna napsal(a):
>Dobry den,
>mam grafickou kartu Ati (AGP) a S3 (pci), chtel bych mit vystup na dva
>monitory. Na netu o tom nemuzu nic najit, jak tedy na to? Musim neco zapnout
>v jadre? Jak se to potom ovlada? Mam Debian (2.4.20). Dík za radu ;-)
------------- další část ---------------
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
##########################################################################
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
EndSection
##########################################################################
# Server flags section.
##########################################################################
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
##########################################################################
# Input devices
##########################################################################
#
# Keyboard section
#
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
#
# Pointer section
#
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
EndSection
##########################################################################
# Module section
##########################################################################
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
##########################################################################
# Monitor section
##########################################################################
Section "Monitor"
Identifier "MyMonitor"
VendorName "Mitsubisi"
ModelName "Diamond Plus 120u"
# be sure to replace these values with values appropriate for your
# monitor!
HorizSync 31-82
VertRefresh 55-120
EndSection
##########################################################################
# Graphics device section(s)
##########################################################################
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NV PCI"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:0:13:0"
EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
# sample twinview setup
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
Option "ConnectedMonitor" "crt,crt"
EndSection
##########################################################################
# Screen sections
##########################################################################
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "Screen AGP"
Device "NV AGP"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia PCI card
#
Section "Screen"
Identifier "Screen PCI"
Device "NV PCI"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
Identifier "Screen AGP TwinView"
Device "NV AGP TwinView"
Monitor "MyMonitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################
#
# just one agp card
#
Section "ServerLayout"
Identifier "AGP"
Screen "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one pci card
#
Section "ServerLayout"
Identifier "PCI"
Screen "Screen PCI"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, non twinview
#
Section "ServerLayout"
Identifier "Both"
Screen "Screen AGP"
Screen "Screen PCI" LeftOf "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one agp twinview card
#
Section "ServerLayout"
Identifier "AGPTwinView"
Screen "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
Identifier "BothTwinView"
Screen "Screen AGP TwinView"
Screen "Screen PCI" LeftOf "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Další informace o konferenci Linux