ISDN ext modem Microcom

[walker]

Rad bych taky poradil, ale pres pppd se mi ISDN modem taky nepodarilo
rozchodit ATX3 -->> bad command (a to sem mel original manual s AT
prikazy, podle kterych to melo chodit)
nakonec pouzivalm isdn utility

isdn start
isdn-up
isdn-down
isdn stop

walker







On St, 2003-02-12 at 13:04, Fiala, Roman wrote:
   Ahoj. Prosim, mel by někdo cas poradit jak nastavit v 
 Wvdial inicializaci externiho Microcom ISDN TA aby 
 necekal na oznamovaci ton? Jak je videt dole na 
 prvnim vypisu, ceka na nej. Prosel jsem konferenci a 
 pripsal jeste jeden init (Init3 = ATX3) ale 
 to pise chybu (druhy vypis)...
 (wvdial.conf je ten treti vypis ;-))
 
 root na pejevka:/# wvdial
 --> WvDial: Internet dialer version 1.53
 --> Initializing modem.
 --> Sending: AT&F
 AT&F
 OK
 --> Sending: ATB40
 ATB40
 OK
 --> Modem initialized.
 --> Sending: ATDT0971200111
 --> Waiting for carrier.
 ATDT0971200111
 
 ----------
 
 root na pejevka:/# wvdial
 --> WvDial: Internet dialer version 1.53
 --> Initializing modem.
 --> Sending: AT&F
 AT&F
 OK
 --> Sending: ATB40
 ATB40
 OK
 --> Sending: ATX3
 ATX3
 ERROR
 --> Bad init string.
 
 ------
 
 [Dialer Defaults]
 Modem = /dev/modem
 Baud = 115200
 Init1 = AT&F
 Init2 = ATB40
 # Init2 = ATX3
 # Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 # Init2 = ATB4
 # ISDN = 0
 Init3 = ATX3
 # Tonline = 1
 Modem Name = ASUSCOM ISDNLink TA
 Modem Type = ISDN Terminal Adapter
 Phone = 0971200111
 Username = xxx
 Password = xxx