remote prijimac sfh-56 a lirc

515 k515en na volny.cz
Pondělí Červen 2 15:44:14 CEST 2003


zdar,
pokousel sem se zprovoznit tento IR prijimac sfh-56 /www.sweb.cz/dopc/
ale s zadnym uspechem:

1] lirc-0.6.6> ./setup.sh
	vyberu home-brew>com2>software generated carrier
					^zde si nejdem jisty, zkusil sem tedy i with transmitter diode na
2. pokus a pak snad i 3. kombinaci

2] configure:
skonci uspesne s
You will have to use the lirc_serial kernel module.
Now enter 'make' and 'make install' to compile and install the package.

3] dam tedy make;make install - v poradku

4] ls -l /dev/lir*
crw-r--r--    1 root     root      61,   0 May 26 20:54 /dev/lirc
srw-rw-rw-    1 root     root            0 May 26 22:10 /dev/lircd=
prw-r--r--    1 root     root            0 Jan 27 21:16 /dev/lircm|

5] jadro mam s modularnim serial.o
rmmod serial; modprobe lirc_serial

6]
#setserial  /dev/ttyS1 uart none
#setserial /dev/ttyS1
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3

7] #cat /etc/modules.conf
alias char-major-61 lirc_serial
options lirc_serial irq=3 io=0x2f8

8] mode2 - at mackam co chci, zadny vystup

9] zkusim tedy
#ln -s /dev/ttyS1 /dev/lirc
lrwxrwxrwx    1 root     root           10 Jun  1 19:01 /dev/lirc ->
/dev/ttyS1

pote mode2 skonci s
This program is only intended for receivers supporting the pulse/space
layer.
Note that this is no error, but this program simply makes no sense for your
receiver.

10] nasel sem svuj ovladac v remotes.tbz2 a skopiroval do /etc/lircd.conf

11] #irw
connect: Connection refused

12] nastaveni ~/.lircrc
ale jak se dalo cekat nic nefunguje
ale podle zatizeni procesoru pri drzeni tlac. ovladace bych rekl ze az
po seriovy port vse funguje kdyz generuje preruseni, problem je tedy asi
SW, ve win pomoci girderu a pluginu od igora take vse jede

co delam spatne :]
dik
svoboda




Další informace o konferenci Linux