SMART (delsi)
Miroslav Semora
semora na seznam.cz
Středa Březen 5 12:07:57 CET 2003
Rad bych se taky pripojil s dotazem, kde hledat teplotu na disku:
Mam WD 80G s 8MB cache, WDC WD800JB-00CRA1.
Na domovske strance hddtemp, resp. v 'oficialni' databazi
http://coredump.free.fr/linux/hddtemp.db
je to treti polozka zdola, zakomentovana s dovetkem 'unsure for next'.
Kdyz ji odkomentuju, dostavam:
#hddtemp /dev/hda
/dev/hda: WDC WD800JB-00CRA1: 0°C
Neni nutno tuto ficuru nejak aktivovat?
Vypis hdparm a smartcl prikladam.
Dekuji
Semora
On Wed, 05 Mar 2003 10:55:50 +0100, kratochvil jiri wrote:
> On Wed, Mar 05, 2003 at 09:38:14AM +0000, Vaclav Dvorsky wrote:
>>
>> Proste u smartctl nevidim rozepsanou teplotu disku, zda se mi, ze by
>> mohla byt na 194, ale jisty si nejsem. Je mozne, ze by hlaska device
>> does not report version: 1 2 3 4 5 znamenala, ze u smartctl nebudou
>> hodnoty oznaceny slovne nebo je to jeste uplne jinak a ten disk teplotu
>> merit neumi?
>> Diky
>>
>>
> A co Vam povi
> # smartctl -a
>
> tento vypis byva "ukecanejsi"
*******************************************
#hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: WDC WD800JB-00CRA1
Serial Number: WD-WMA8E4419364
Firmware Revision: 17.07W17
Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 40 Queue depth: 1
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Device Configuration Overlay feature set
Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
*******************************************
#smartcl -a /dev/hda
smartctl version 5.1-4 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD800JB-00CRA1
Serial Number: WD-WMA8E4419364
Firmware Version: 17.07W17
ATA Version is: 5
ATA Standard is: Unrecognized. Minor revision code: 0x00
Local Time is: Wed Mar 5 12:01:33 2003 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x84) Offline data collection activity was
suspended by an interrupting command from host.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete off-line
data collection: (3120) seconds.
Offline data collection
capabilities: (0x3b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail - 0
3 Spin_Up_Time 0x0007 094 092 021 Pre-fail - 4358
4 Start_Stop_Count 0x0032 100 100 040 Old_age - 339
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail - 0
7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age - 1371
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age - 121
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log, version number 1
No self-tests have been logged
Další informace o konferenci Linux