Paskova jednotka Sony SDX-420C pod SuSE 8.2
Tomas MACOUREK
macourek na microware.cz
Neděle Květen 4 12:17:44 CEST 2003
Dobry den,
uz druhy den bojuji se %subj% a obracim se tedy o radu.
Popis zapojeni:
Jednotka ATAPI SONY SDX-420C je pripojena jako master (zkousel jsem i
slave i single) na 2.kanalu radice desky Tyan (na typu nesejde) vice je
videt v prilozenych souborech. Jako slave na stejnem kabelu je i CDRW
jednotka TEAC (ale pri testovani jsem ji i odpojil). CDRW je VZDY
nalezeno spravne a i zprovozneno jako ide-scsi emulace a je funkcni.
Problem:
SDX-420C je z pozice jak biosu desky tak i pri startu systemu "videt"
viz boot.msg a dale v priloze ALE temer nikdy neni zprovozneno. Vzdy
hlasi nejakou chybu inicializace (viz vypisy), nic mene pri testovani
pod w2k na stejnem compu i kabelu se toto neprojevovalo a chodilo vse OK.
Pokus o pripojeni jednotky SDX-420C jako ide-tape na /dev/ht0 konci
rovnez neuspesne (kousne se cely pocitac -> hw reset)
Po zmenach v nastaveni modulu pro jadro v grub a po vymazani duplicit
CDROMu v /var/lib/hardware/unique-keys/ viz vypis hwscan v priloze
(duplicity se tam objevuji bez zjevne priciny a nasel jsem jich tam po 2
hodinach laborovani asi 6 kousku) je jednotka SDX-420C nepravidelne
JEDENKRAT inicializovana jako scsi zarizeni a do vypnuti pocitace chodi
na /dev/st0 (testovano i se zalohou) -> priloha boot.msg.uspech.
Zajimave je , ze i kdyz chodi tak se nedobjevi v hwscan --list. Jinak
statu pri funkcnosti je v status_st0.txt
Muzete nekdo prosim poradit
Diky
--
Tomas MACOUREK
ICQ 5949809
------------- další část ---------------
drive type = Generic SCSI-2 tape
drive status = 805306880
sense key error = 0
residue count = 0
file number = 0
block number = 0
Tape block size 512 bytes. Density code 0x30 (unknown).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
------------- další část ---------------
vSkL._0hIaPw8eI5: (cfg=no, avail=yes, need=no) bridge Intel 82845 845 (Brookdale) Chipset AGP Bridge
1GTX.ib3C_3aP3X8: (cfg=yes, avail=yes, need=no) usb controller Intel 82801DB USB (Hub #1)
5YuN.YyVMfX9_1G9: (cfg=yes, avail=yes, need=no) usb controller Intel 82801DB USB EHCI Controller
rdCR.lZF+r4EgHp4: (cfg=no, avail=yes, need=no) bios BIOS
rdCR.EY_qmtb9YY0: (cfg=yes, avail=yes, need=yes) monitor Generic Monitor
rdCR.CxwsZFjVASF: (cfg=no, avail=yes, need=no) memory Main Memory
vayM.kQyhxCpp6I9: (cfg=yes, avail=yes, need=no) usb controller Intel 82801DB USB (Hub #2)
BUZT.KMmX0iPD370: (cfg=no, avail=yes, need=no) bridge Intel 82801DB ISA Bridge (LPC)
qLht.xZkOY23KH99: (cfg=no, avail=yes, need=no) bridge Intel 82845 845 (Brookdale) Chipset Host Bridge
n6T_.GQNx7L4uPNA: (cfg=no, avail=yes, need=no) network interface Loopback network interface
GA8e.htW7mB2rDz4: (cfg=yes, avail=yes, need=yes) graphics card ATI Rage XL
y9as.Wcsi8V4ddI5: (cfg=no, avail=yes, need=no) network Intel PRO/1000 MT Desktop Adapter
rdCR.iWbWo71vw2C: (cfg=yes, avail=yes, need=yes) keyboard PC Keyboard
3p2J.IUasrdsx472: (cfg=no, avail=yes, need=no) storage Intel 82801DB ICH4 IDE
sPPV.oZ89vuho4Y3: (cfg=yes, avail=yes, need=no) floppy Floppy Disk
yibb.iquB8cmEOd0: (cfg=yes, avail=yes, need=yes) mouse Intelli/Wheel Mouse
Phe5.ndpeucax6V1: (cfg=no, avail=yes, need=no) network interface Ethernet network interface
3Okj.Jt1hg9mdkyE: (cfg=new, avail=yes, need=no) hub Hub
B3Fu.msGAueKTmhB: (cfg=no, avail=yes, need=no) hub Linux 2.4.20-4GB ehci-hcd Intel Corp. 82801DB USB EHCI Controller
B3Fu.Jt1hg9mdkyE: (cfg=no, avail=yes, need=no) hub Hub
nS1_.FRuM_BiD+87: (cfg=no, avail=yes, need=no) unknown Intel 82801DB SMBus
wiDZ.Jt1hg9mdkyE: (cfg=new, avail=yes, need=no) hub Hub
rdCR.n_7QNeEnh23: (cfg=no, avail=yes, need=no) system System
RaT_.nfEXJulusj6: (cfg=no, avail=yes, need=no) network interface Network Interface
oxTw.nY1Z+aI9ax3: (cfg=yes, avail=yes, need=no) network Intel 82801BD PRO/100 VE (LOM) Ethernet Controller
rdCR.xXVvziWR6cC: (cfg=no, avail=yes, need=no) framebuffer ATI MACH64 MACH64GM
zyP1.ye2pzOt4v55: (cfg=yes, avail=yes, need=no) cdrom TEAC CD-W552E
3Okj.DepQEL9QL2B: (cfg=no, avail=no, need=no) hub Intel Root Hub
hY5p.qOuRuMAA7vF: (cfg=no, avail=no, need=no) cdrom TEAC CD-W552E
B3Fu.DepQEL9QL2B: (cfg=no, avail=no, need=no) hub Intel Root Hub
nBbg.Rez86i8OmT5: (cfg=yes, avail=yes, need=no) disk SOHO-RAID
mvRC.HgnxNw9xhRA: (cfg=yes, avail=yes, need=no) usb controller Intel 82801DB USB (Hub #3)
rdCR.3wRL2_g4d2B: (cfg=no, avail=yes, need=no) storage Floppy disk controller
rdCR.j8NaKXDZtZ6: (cfg=no, avail=yes, need=no) cpu Intel(R) Pentium(R) 4 CPU 1.70GHz, 1730 MHz
6NW+.5o60iem1mwE: (cfg=no, avail=yes, need=no) bridge Intel 82801BA/CA/DB PCI Bridge
------------- další část ---------------
Inspecting /boot/System.map-2.4.20-4GB
Loaded 20952 symbols from /boot/System.map-2.4.20-4GB.
Symbols match kernel version 2.4.20.
Loaded 94 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.20-4GB (root na Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 IntelR ) @ 0x000f6a30
<6>ACPI: RSDT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3000
<6>ACPI: FADT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3040
<6>ACPI: DSDT (v001 INTELR AWRDACPI 00000.04096) @ 0x00000000
<5>ACPI: BIOS passes blacklist
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda5 vga=0x317 hdd=ide-scsi hdc=ide-scsi splash=silent splash=silent
<6>ide_setup: hdd=ide-scsi
<6>ide_setup: hdc=ide-scsi
<6>bootsplash: silent mode.
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 1730.946 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3447.19 BogoMIPS
<6>Memory: 514260k/524224k available (1569k kernel code, 9576k reserved, 574k data, 160k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch na atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030228
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=2
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 32764
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe4000000, mapped to 0xe0815000, size 8128k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at c000:4cae
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768, 23130 bytes, v3).
<6>Got silent jpeg.
<6>Got silent jpeg.
<4>Console: switching to colour frame buffer device 118x38
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH4: IDE controller at PCI slot 00:1f.1
<6>ICH4: chipset revision 1
<6>ICH4: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: SOHO-RAID, ATA DISK drive
<6>hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30)
<6>hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30)
<4>blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: TEAC CD-W552E, ATAPI CD/DVD-ROM drive
<4>hdd: SONY SDX-420C, ATAPI TAPE drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hda: task_no_data_intr: error=0x04 { DriveStatusError }
<6>hda: 234441648 sectors (120034 MB), CHS=14593/255/63, UDMA(33)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 hda3 < hda5 hda6 >
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 538k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>hdd: attached ide-scsi driver.
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>hdd: status timeout: status=0xd0 { Busy }
<3>ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
<4>hdd: ATAPI reset complete
<4> Vendor: TEAC Model: CD-W552E Rev: 1.05
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (ide0(3,5)) for (ide0(3,5))
<4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
<4>hda: drive_cmd: error=0x04 { DriveStatusError }
<4>hda: cache flushing failed. disable write back cacheing for journalled file systems
<4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
<4>hda: drive_cmd: error=0x04 { DriveStatusError }
<4>hda: cache flushing failed. disable write back cacheing for journalled file systems
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 160k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
<6>Adding Swap: 1052248k swap-space (priority 42)
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6))
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
------------- další část ---------------
Inspecting /boot/System.map-2.4.20-4GB
Loaded 20952 symbols from /boot/System.map-2.4.20-4GB.
Symbols match kernel version 2.4.20.
Loaded 94 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.20-4GB (root na Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 IntelR ) @ 0x000f6a30
<6>ACPI: RSDT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3000
<6>ACPI: FADT (v001 IntelR AWRDACPI 16944.11825) @ 0x1fff3040
<6>ACPI: DSDT (v001 INTELR AWRDACPI 00000.04096) @ 0x00000000
<5>ACPI: BIOS passes blacklist
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda5 vga=0x317 hdc=ide-scsi hdclun=0 splash=silent splash=silent
<6>ide_setup: hdc=ide-scsi
<6>ide_setup: hdclun=0
<6>bootsplash: silent mode.
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 1730.947 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3447.19 BogoMIPS
<6>Memory: 514260k/524224k available (1569k kernel code, 9576k reserved, 574k data, 160k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch na atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030228
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=2
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 32764
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe4000000, mapped to 0xe0815000, size 8128k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at c000:4cae
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768, 23130 bytes, v3).
<6>Got silent jpeg.
<6>Got silent jpeg.
<4>Console: switching to colour frame buffer device 118x38
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH4: IDE controller at PCI slot 00:1f.1
<6>ICH4: chipset revision 1
<6>ICH4: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: SOHO-RAID, ATA DISK drive
<6>hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30)
<6>hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30)
<4>blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: SONY SDX-420C, ATAPI TAPE drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hda: task_no_data_intr: error=0x04 { DriveStatusError }
<6>hda: 234441648 sectors (120034 MB), CHS=14593/255/63, UDMA(33)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 hda3 < hda5 hda6 >
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 538k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>hdc: status timeout: status=0xd0 { Busy }
<3>ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
<4>hdc: ATAPI reset complete
<4> Vendor: SONY Model: SDX-420C Rev: 0103
<4> Type: Sequential-Access ANSI SCSI revision: 02
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (ide0(3,5)) for (ide0(3,5))
<4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
<4>hda: drive_cmd: error=0x04 { DriveStatusError }
<4>hda: cache flushing failed. disable write back cacheing for journalled file systems
<4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
<4>hda: drive_cmd: error=0x04 { DriveStatusError }
<4>hda: cache flushing failed. disable write back cacheing for journalled file systems
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 160k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
<6>Adding Swap: 1052248k swap-space (priority 42)
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6))
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Další informace o konferenci Linux