problem s USB 2.0 Flash Drive

arpanet na post.cz arpanet na post.cz
Středa Říjen 22 11:34:55 CEST 2003


On Wed, 22 Oct 2003 10:02:36 +0200
"Kotrla Vitezslav" <kotrla na ceb.cz> wrote:

> Dobry den vespolek, jdu se vyplakat.
> 
> dostal se mi do ruky USB 2.0 flash disk (Apacer 256MB
> HandySteno TN202), ale nemuzu ho pripojit. Uz dlouho 
> pouzivam ruzne starsi (USB 1.1) flash disky a v zasade
> bez problemu, ted jsem ale dojel:
> 
> po zasunuti tail /var/log/messages:
> 
> Oct 22 09:34:51 ws14-l kernel: hub.c: new USB device 00:04.2-1, assigned address 2
> Oct 22 09:34:51 ws14-l kernel: Product: USB Flash Drive
> Oct 22 09:34:51 ws14-l kernel: SerialNumber: 070200010A90AB0
> Oct 22 09:34:51 ws14-l kernel: scsi0 : SCSI emulation for USB Mass Storage devices
> Oct 22 09:34:51 ws14-l kernel:   Vendor: USB       Model: Flash Drive       Rev: 1.12
> Oct 22 09:34:51 ws14-l kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
> Oct 22 09:34:51 ws14-l kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> Oct 22 09:34:51 ws14-l kernel: SCSI device sda: 507901 512-byte hdwr sectors (260 MB)
> Oct 22 09:34:51 ws14-l kernel: sda: Write Protect is off
> Oct 22 09:34:51 ws14-l kernel:  sda:<7>usb-storage: queuecommand() called
> Oct 22 09:34:51 ws14-l kernel:  sda1 sda2 sda3 sda4
> 
> Problem je ale zde:
> 
> 
> ws14-l:/home/vitko# fdisk /dev/sda          
> 
> Unable to read /dev/sda
> ^^^^^^^^^^^^^^^^^^^^^^^
> 
> 
> Pochopitelne tu vec potom ani neprimountuju, vysledkem je 
> nanejvyj halda IO error a block not found...
> 
> Jeste par obligatnich informaci o zeleze a kernelu (pokud jsem
> na neco zapomel, predem dekuji za upozorneni):
> 
> 
> ws14-l:/home/vitko# cat /proc/pci | grep USB
>     USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
> 
> 
> ws14-l:/home/vitko# uname -a
> Linux ws14-l 2.4.22 #1 St říj 22 09:07:17 CEST 2003 i686 unknown
> 
> 
> ws14-l:/home/vitko# cat /proc/scsi/usb-storage-0/0 
>    Host scsi0: usb-storage
>        Vendor: Unknown
>       Product: USB Flash Drive
> Serial Number: 070200010A90AB0
>      Protocol: Transparent SCSI
>     Transport: Bulk
>          GUID: 1005b1130070200010a90ab0
>      Attached: Yes
> 
> 
> ws14-l:/home/vitko# cat /proc/partitions 
> major minor  #blocks  name     rio rmerge rsect ruse wio wmerge wsect wuse running use aveq
> 
>    8     0     253950 sda 27 151 198 1320 0 0 0 0 0 1320 1320
>    8     1   84344762 sda1 21 107 140 960 0 0 0 0 0 960 960
>    8     2  934360246 sda2 1 0 1 20 0 0 0 0 0 20 20
>    8     3  112900025 sda3 0 0 0 0 0 0 0 0 0 0 0
>    8     4 1717523968 sda4 0 0 0 0 0 0 0 0 0 0 0
> <snip>
> 
> 
> ---
>   VK
> 
> 
>

a co takhle prepsat zacaatek tyyy flashky nulama a zkusit tam udelat partiicii a filesystem ... ? 

-----Banshee foot--------------------------------
            Better Artificial Inteligence than Natural Stupidity
   		  a nekdy je nejlepczi kedluben -) 


Další informace o konferenci Linux