Jak na paskovou mechaniku

Roman DAVID rdavid na danet.cz
Úterý Duben 6 12:15:35 CEST 2004


jirkajj na centrum.cz wrote:
> Ahoj linuxari,
> po instalaci paskove mechaniky 40/80GB HH DLTVS na stroj s RH73 mi mt -f /dev/nst0 (st0) status hlasi:
> SCSI 2 tape drive:
> File number=0, block number=-1, partition=0.
> Tape block size=0 bytes. Density code 0x40 (DLT1 40GB, or Ultrium).
> Soft error count since last status=0
> General status bits on (5010000):
> BOT WR_PROT ONLINE IM_REP_EN
       ^^^^^^^
Nebude to "write protected", tzn na pasce zapnuta ochrana
proti prepsani ?

> Kdyz dam tar -cvf /dev/nst0 /home tak se vrati 
 > Cannot open: System souboru je pouze pro cteni tar:
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tohle by tomu taky nasvedcovalo :-)

Roman DAVID


Další informace o konferenci Linux