usb dvdrw na WB30 uz je videt ale nepali dvd
Honza E
honza na pc234.math.cas.cz
Čtvrtek Srpen 5 11:47:57 CEST 2004
(potize pokracuji...)
Vzal jsem si TEACovou mechaniku na vyzkouseni domu,
kde je RH8 a jadro 2.4.26;
pokus o pripojeni TEACa pres USB dopadl takto (viz nize)
Absolutni hodnotu chyby se mi "podarilo" zmensit z -110 na -71 :-)
nicmene mechanika "videt" neni.
Moduly se ale natahuji (stejne jako ty v RH7.2, kde je 2.4.7-10
a kde to jako CDRW vypalovacka uz i chodilo
[nasleduje vnoreny dotaz :-]
Pouze vsak "jako CDRW". Kdyz jsem vypalil na DVD medium
DVD-RW Samsungu, jinej nebyl v okoli,
pomoci dvd+rw-tools
kratky iso image (vznikly pomoci mkisofs z cdrtools),
vse probehlo ok a disk byl posleze citelny.
Kdyz jsem vsak vypalil delsi --asi 2.2GB-- iso image
(vznikly stejnym postupem), vypaleni probehlo ok
(neskoncilo chybou, nevim, jak _skutecne_ vypada spravne probehle
vypaleni pomoci dvd+rv-tools), ale pri naslednem
pokusu o cteni se disk tvaril jako nevypaleny a
dvd+rw-mediainfo hlasil sice vypaleny track, patricne mene
volneho mista na disku, ale track nebyl oznacen "complete" jako
v predchozim pokusu s kratkym iso-imagem.
)
narozdil od predchoziho pokusu na opteronu ale nepomohl ani
noapic parametr v grubu :-/
Muzete poradit?
Diky!
Honza
.. done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1494.5767 MHz.
..... host bus clock speed is 239.1321 MHz.
cpu: 0, clocks: 2391321, slice: 1195660
CPU0<T0:2391312,T1:1195648,D:4,S:1195660,C:2391321>
mtrr: v1.40 (20010327) Richard Gooch (rgooch na atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
blk: queue c03811e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA DVD-ROM SD-R1312, ATAPI CD/DVD-ROM drive
hdd: CREATIVECD4020E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(133)
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R1312 Rev: 1010
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: CREATIVE Model: CD4020E ST980828 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
Attached scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
Attached scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
Attached scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
Attached scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
Attached scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
Attached scsi CD-ROM sr7 at scsi0, channel 0, id 1, lun 0
Attached scsi CD-ROM sr8 at scsi0, channel 0, id 1, lun 1
Attached scsi CD-ROM sr9 at scsi0, channel 0, id 1, lun 2
Attached scsi CD-ROM sr10 at scsi0, channel 0, id 1, lun 3
Attached scsi CD-ROM sr11 at scsi0, channel 0, id 1, lun 4
Attached scsi CD-ROM sr12 at scsi0, channel 0, id 1, lun 5
Attached scsi CD-ROM sr13 at scsi0, channel 0, id 1, lun 6
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr4: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr5: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr6: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr7: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr8: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr9: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr10: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr11: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr12: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
sr13: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 129k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 148k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 5, pci mem d0852b00
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 00:18:21 Apr 24 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech na suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:10.3-6, assigned address 2
usb.c: USB device 2 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 522072k swap-space (priority -1)
usb.c: USB disconnect on device 00:10.3-6 address 2
hub.c: new USB device 00:10.3-6, assigned address 3
usb.c: USB device 3 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: USB disconnect on device 00:10.3-6 address 3
hub.c: new USB device 00:10.3-6, assigned address 4
usb.c: USB device 4 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 4
hub.c: new USB device 00:10.3-6, assigned address 5
usb.c: USB device not responding, giving up (error=-71)
hub.c: new USB device 00:10.3-6, assigned address 6
usb.c: USB device 6 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 6
hub.c: new USB device 00:10.3-6, assigned address 7
usb.c: USB device 7 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 7
hub.c: new USB device 00:10.3-6, assigned address 8
usb.c: USB device 8 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 8
hub.c: new USB device 00:10.3-6, assigned address 9
usb.c: USB device 9 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 9
hub.c: new USB device 00:10.3-6, assigned address 10
usb.c: USB device 10 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 10
hub.c: new USB device 00:10.3-6, assigned address 11
usb.c: USB device 11 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 11
hub.c: new USB device 00:10.3-6, assigned address 12
usb.c: USB device not responding, giving up (error=-71)
hub.c: new USB device 00:10.3-6, assigned address 13
usb.c: USB device 13 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 13
hub.c: new USB device 00:10.3-6, assigned address 14
usb.c: USB device 14 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 14
hub.c: new USB device 00:10.3-6, assigned address 15
usb.c: USB device 15 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 15
hub.c: new USB device 00:10.3-6, assigned address 16
usb.c: USB device 16 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 16
hub.c: new USB device 00:10.3-6, assigned address 17
usb.c: USB device 17 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 17
hub.c: new USB device 00:10.3-6, assigned address 18
usb.c: USB device 18 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 18
hub.c: new USB device 00:10.3-6, assigned address 19
usb.c: USB device 19 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 19
hub.c: new USB device 00:10.3-6, assigned address 20
usb.c: USB device 20 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 20
hub.c: new USB device 00:10.3-6, assigned address 21
usb.c: USB device 21 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 21
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
hub.c: new USB device 00:10.3-6, assigned address 22
usb.c: USB device 22 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 22
hub.c: new USB device 00:10.3-6, assigned address 23
usb.c: USB device 23 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 23
hub.c: new USB device 00:10.3-6, assigned address 24
usb.c: USB device not responding, giving up (error=-71)
hub.c: new USB device 00:10.3-6, assigned address 25
usb.c: USB device 25 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 25
hub.c: new USB device 00:10.3-6, assigned address 26
usb.c: USB device 26 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 26
hub.c: new USB device 00:10.3-6, assigned address 27
usb.c: USB device 27 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 27
hub.c: new USB device 00:10.3-6, assigned address 28
usb.c: USB device 28 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 28
hub.c: new USB device 00:10.3-6, assigned address 29
usb.c: USB device 29 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 29
hub.c: new USB device 00:10.3-6, assigned address 30
usb.c: USB device 30 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 30
hub.c: new USB device 00:10.3-6, assigned address 31
usb.c: USB device 31 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 31
hub.c: new USB device 00:10.3-6, assigned address 32
usb.c: USB device 32 (vend/prod 0x5e3/0x701) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-6 address 32
hub.c: new USB device 00:10.3-6, assigned address 33
usb.c: USB device not responding, giving up (error=-71)
hub.c: new USB device 00:10.3-6, assigned address 34
usb.c: USB device not responding, giving up (error=-71)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 Aperture @ 0xe0000000 64MB
[drm] Initialized r128 2.2.0 20010917 on minor 0
cmpci: version $Revision: 6.16 $ time 00:16:25 Apr 24 2004
cmpci: found CM8738 adapter at io 0xec00 irq 11
cmpci: chip version = 055
spurious 8259A interrupt: IRQ7.
Další informace o konferenci Linux