Kernel - nefunkcni interupt (irq10: nobody cared)

[Honza Roztomily]

Zdravim,
instaloval jsem Fedoru Core2, na MB MSI 865G Neo2 a pripojil 2 SATA Disky
plus DVD RW Teac na primarni IDE jako master. I kdyz deska umoznuje SATA
RAID tak jsem ho ignoroval a nastavil disky do sw raidu pri instalaci.
A ted k problemu pri bootu se hned po rozbaleni jadra objevuje hlaska:
Kernel 2.6.5-1.358 vychozi

handlers:
[<021f5a08>] (ide_intr+0x0/0xe3)
Disabling IRQ #10
irq 10: nobody cared! (screaming interrupt?)
handlers:
[<021f5a08>] (ide_intr+0x0/0xe3)
Disabling IRQ #10
irq 10: nobody cared! (screaming interrupt?)
...
INIT: version 2.85 booting
... normalne nabiha ...
Remounting file system in read-write mode    [OK]
Disabling IRQ #10
Disabling IRQ #10
Disabling IRQ #10
Disabling IRQ #10
Activating swap   [OK]
Starting up RAID devices: md0 md1 md2 md3
Setting up Logical Volume Management: Disabling IRQ #10
Disabling IRQ #10
Disabling IRQ #10
Disabling IRQ #10
Disabling IRQ #10
  No volume groups found
  No volume groups found
  Reading all physical volumes. This may take a while ... [FAILED]
....
pak jiz pokracuje boot normalne
....


[root na gateway root]# cat /proc/interrupts
           CPU0
  0:    1150996          XT-PIC  timer
  1:        461          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:        155          XT-PIC  eth1
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:   12900000          XT-PIC  ide0
 12:         33          XT-PIC  i8042
 14:      21979          XT-PIC  libata
 15:      22084          XT-PIC  libata
NMI:          0
ERR:          0

[root na gateway root]# lspci
00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics
Device (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI
Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage
Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
01:05.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev
86)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)

Chyba nastava pri pokusu mountovat CD i kdyz ho nakonec po hlaskach CD
pripoji ale pokud na IRQ sedi krome ide0 jeste jine zarizeni jako sitovky
tak ty pak vubec nefunguji ale povedlo se mi je presunout na jine preruseni
takze jedou.
Vite nekdo jak to resit ? Dekuji moc Honza Roztomily
-----