soft raid 1

Anton Caniga caniga na bentel.sk
Středa Únor 4 10:15:10 CET 2004


Dňa St 4. Február 2004 10:06 ste napísali:
> On Sun, Sep 04, 2005 at 09:45:30AM +0200, Anton Caniga wrote:
> > Ako sa da zistit aky radic tam je z linuxu.K hardware nemam pristup.
> > Treba prikompilovat nieco do kernelu pre ata raid 1.
>
> lspci  (pripadne lspci -v)
> dmesg | grep ide
> dmesg | grep hd
>
> Ak vystupy tychto programov poslete do konferencie, pravdepodobne
> ziskate nejaku odpeved k veci.
>
> 	Tibor

takze lspci -v 

02:0b.0 RAID bus controller: Promise Technology, Inc.: Unknown device 6268 
(rev 02) (prog-if 85)
	Subsystem: Promise Technology, Inc.: Unknown device 4d68
	Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 9
	I/O ports at dff0 [size=8]
	I/O ports at dfe4 [size=4]
	I/O ports at dfa8 [size=8]
	I/O ports at dfe0 [size=4]
	I/O ports at df90 [size=16]
	Memory at feaf0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at feae0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 1

dmesg | grep ide

BIOS-provided physical RAM map:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    ide2: BM-DMA at 0xdf90-0xdf97, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xdf98-0xdf9f, BIOS settings: hdg:pio, hdh:pio
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xdff0-0xdff7,0xdfe6 on irq 9
md: considering hdc3 ...
md: considering hdc2 ...
md: considering hdc1 ...
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,1), internal journal

dmesg | grep hd

 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    ide2: BM-DMA at 0xdf90-0xdf97, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xdf98-0xdf9f, BIOS settings: hdg:pio, hdh:pio
hda: ST380021A, ATA DISK drive
hdc: ST380021A, ATA DISK drive
hde: WDC WD1000BB-00CAA0, ATA DISK drive
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(100)
hde: 195371568 sectors (100030 MB) w/2048KiB Cache, CHS=193821/16/63, 
UDMA(100)
 hda: hda1 hda2 hda3
 hdc: [PTBL] [9729/255/63] hdc1 hdc2 hdc3
 hde: hde1
md: considering hdc3 ...
md:  adding hdc3 ...
md:  adding hda3 ...
md: bind<hda3,1>
md: bind<hdc3,2>
md: running: <hdc3><hda3>
md: hdc3's event counter: 00000033
md: hda3's event counter: 00000033
raid1: device hdc3 operational as mirror 1
raid1: device hda3 operational as mirror 0
md: hdc3 [events: 00000034]<6>(write) hdc3's sb offset: 1036096
md: hda3 [events: 00000034]<6>(write) hda3's sb offset: 1036096
md: considering hdc2 ...
md:  adding hdc2 ...
md:  adding hda2 ...
md: bind<hda2,1>
md: bind<hdc2,2>
md: running: <hdc2><hda2>
md: hdc2's event counter: 00000033
md: hda2's event counter: 00000033
raid1: device hdc2 operational as mirror 1
raid1: device hda2 operational as mirror 0
md: hdc2 [events: 00000034]<6>(write) hdc2's sb offset: 73023360
md: hda2 [events: 00000034]<6>(write) hda2's sb offset: 73023360
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: bind<hda1,1>
md: bind<hdc1,2>
md: running: <hdc1><hda1>
md: hdc1's event counter: 0000004f
md: hda1's event counter: 0000004f
raid1: device hdc1 operational as mirror 1
raid1: device hda1 operational as mirror 0
md: hdc1 [events: 00000050]<6>(write) hdc1's sb offset: 4088384
md: hda1 [events: 00000050]<6>(write) hda1's sb offset: 4088384



Další informace o konferenci Linux