Poradie ide pri bootovani

[ojo na force.sk]

Zdravim.

Mam taky maly problem. Kupil som PCI IDE radic a teraz pri bootovani Linuxu najprv
nabehne tento externy radic a az potom radic z dosky. V jadre je volba
"Boot off-board chipsets first support", ale ta nie je aktivovana. Takze teraz namiesto hda
mam hde. Viemi niekto poradit ako sa da Linux donutit aby nacital najprv radic na
doske a az potom externy? Pod FreeBSD 5.2 to funguje.

Konfiguracia:

Gentoo 1.4
kernel 2.6.1 (rovnako sa chova aj pri 2.4.23)

dmesg:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SiI680: IDE controller at PCI slot 0000:00:08.0
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 11
    ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
hdc: TEAC DV-W58G, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide1 at 0xe08140c0-0xe08140c7,0xe08140ca on irq 11
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:DMA
    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L060AVVA07-0, ATA DISK drive
hdf: Maxtor 5T020H2, ATA DISK drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hdg: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
hdh: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive
ide3 at 0x170-0x177,0x376 on irq 15
hde: max request size: 128KiB
hde: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host2/bus0/target0/lun0: p1 p2 p3
hdf: max request size: 128KiB
hdf: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, UDMA(100)
 /dev/ide/host2/bus0/target1/lun0: p1 p2 p3
 p2: <bsd: >
 p3: <bsd: >



grub.conf:
default 2
timeout 2
splashimage=(hd0,1)/boot/grub/powered-by.xpm.gz

title=Gentoo Linux (2.4.22)
        root (hd0,1)
        kernel (hd0,1)/boot/kernel-2.4.22-gentoo-r3 root=/dev/hde2 hdc=ide-scsi hdg=ide-scsi hdh=ide-scsi vga=791
title=Gentoo Linux (2.4.23)
        root (hd0,1)
        kernel (hd0,1)/boot/kernel-2.4.23 root=/dev/hde2 hdc=ide-scsi hdg=ide-scsi hdh=ide-scsi vga=791
title=Gentoo Linux (2.6.1-gentoo)
        root (hd0,1)
        kernel (hd0,1)/boot/vmlinuz-2.6.1-gentoo root=/dev/hde2 hdc=ide-scsi hdg=ide-scsi hdh=ide-scsi resume=/dev/hda3