Pinnacle BTTV pro (podruhe)

[Martin Lipinsky]

Dobry den.

Po chvilce trapeni jsem rozchodil kamaradovu karty %subj% a protoze
chodila hezky, objednal jsem tutez, zakoupil a ..... zase se nemam na co
divat.

Karta je ve zcela jine revizi. Ma odlisny tuner, a to bude kamen urazu.

cervene PCB, na nem je ID: EMPTYV-51015403-2.4 tedy jestli tomu dobre
rozumim varianta 2.4

Karta se najde, ale pravdepodobne je problem s tunerem, z vypisu dmesg
(viz nize) se zda ze problem je opravdu v nalezeni spravneho tuneru:

Jan 20 13:09:20 gargamel kernel: tuner: chip found @ 0xc0
Jan 20 13:09:20 gargamel kernel: tuner: type set to 33 (MT20xx universal)
Jan 20 13:09:20 gargamel kernel: tuner: microtune: companycode=8e3f
part=42 rev=47

Po progoogovavani WEBu se zda ze tyhle nove pinnacly by meli mit v sobe
tuner MT2050 (mozna) nicmene jak mu ji vnutit ?

Zkousel jsem ciste bttv z kernelu 2.4.24 a ted tam mam 2.4.24 s kraxel
patchem z http://bytesex.org/patches/2.4.24-1/

Vysledek je stejny, kdyz pustim xawtv nebo scantv, sype se do logu:

Jan 20 13:15:02 gargamel kernel: tuner: Huh? tv_set is NULL?
.
.
.

predtim s cistou 2.4.24 psal neco malinko jineho ale stejne neladil :(


Predem dekuji za zkusenosti ci rady

---------------------------------------------------------


Jan 20 13:09:20 gargamel kernel: bttv: driver version 0.9.12 loaded
Jan 20 13:09:20 gargamel kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Jan 20 13:09:20 gargamel kernel: bttv: Bt8xx card found (0).
Jan 20 13:09:20 gargamel kernel: PCI: Found IRQ 10 for device 02:07.0
Jan 20 13:09:20 gargamel kernel: PCI: Sharing IRQ 10 with 00:1f.4
Jan 20 13:09:20 gargamel kernel: PCI: Sharing IRQ 10 with 02:07.1
Jan 20 13:09:20 gargamel kernel: bttv0: Bt878 (rev 17) at 02:07.0, irq:
10, latency: 32, mmio: 0xddbfe000
Jan 20 13:09:20 gargamel kernel: bttv0: detected: Pinnacle PCTV [card=39],
PCI subsystem ID is 11bd:0012
Jan 20 13:09:20 gargamel kernel: bttv0: using: Pinnacle PCTV Studio/Rave
[card=39,autodetected]
Jan 20 13:09:20 gargamel kernel: bttv0: gpio: en=00000000, out=00000000
in=00fffbff [init]
Jan 20 13:09:20 gargamel kernel: msp34xx: init: chip=MSP3410G-B11 +nicam
+simple +radio
Jan 20 13:09:20 gargamel kernel: msp3400: daemon started
Jan 20 13:09:20 gargamel kernel: i2c-core.o: client [MSP3410G-B11]
registered to adapter [bt878 #0 [sw]](pos. 0).
Jan 20 13:09:20 gargamel kernel: i2c-core.o: adapter bt878 #0 [sw]
registered as adapter 0.
Jan 20 13:09:20 gargamel kernel: bttv0: i2c: checking for MSP34xx @
0x80... found
Jan 20 13:09:20 gargamel kernel: bttv0: pinnacle/mt: id=2 info="PAL+SECAM
/ stereo" radio=yes
Jan 20 13:09:20 gargamel kernel: bttv0: using tuner=33
Jan 20 13:09:20 gargamel kernel: bttv0: i2c: checking for MSP34xx @
0x80... found
Jan 20 13:09:20 gargamel kernel: bttv0: i2c: checking for TDA9875 @
0xb0... not found
Jan 20 13:09:20 gargamel kernel: bttv0: i2c: checking for TDA7432 @
0x8a... not found
Jan 20 13:09:20 gargamel kernel: bttv0: registered device video0
Jan 20 13:09:20 gargamel kernel: bttv0: registered device vbi0
Jan 20 13:09:20 gargamel kernel: bttv0: registered device radio0
Jan 20 13:09:20 gargamel kernel: bttv0: PLL: 28636363 => 35468950 . ok
Jan 20 13:09:20 gargamel kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Jan 20 13:09:20 gargamel kernel: tuner: chip found @ 0xc0
Jan 20 13:09:20 gargamel kernel: tuner: type set to 33 (MT20xx universal)
Jan 20 13:09:20 gargamel kernel: tuner: microtune: companycode=8e3f
part=42 rev=47
Jan 20 13:09:20 gargamel kernel: tuner: microtune: unknown companycode
Jan 20 13:09:20 gargamel kernel: i2c-core.o: client [MT20xx universal]
registered to adapter [bt878 #0 [sw]](pos. 1).






S pozdravem

---------------------------------------------------------[ Martin Lipinsky ]--
Motto: Jak to vis ze je carodejnice ? Protoze tak vypada !