GPRS PCMCIA modem

[Pavel Košarník]

Dobry den,

snazim sa rozchodit $subj. Ide o Eurotel data card, resp. pravdepodobne 
ActionTec PCMCIA I-TEC GPRS CardPhone (http://www.i-tec.cz/index_7a.htm).
Neuspesne!

Komunikacia vyzera nasledovne:
Jun 13 23:15:42 acer chat[3247]: send (AT+CGDCONT=1,"IP","Internet"^M)
Jun 13 23:15:42 acer chat[3247]: expect (OK)
..
Jun 13 23:15:42 acer chat[3247]: send (ATD*99***1#^M)
Jun 13 23:15:42 acer chat[3247]: expect (CONNECT)
..
Jun 13 23:15:42 acer chat[3247]: CONNECT
Jun 13 23:15:42 acer chat[3247]: send (\d)
Jun 13 23:15:43 acer pppd[3245]: Serial connection established.
Jun 13 23:15:43 acer pppd[3245]: Using interface ppp0
Jun 13 23:15:43 acer pppd[3245]: Connect: ppp0 <--> /dev/modem
Jun 13 23:15:45 acer kernel: PPP BSD Compression module registered
Jun 13 23:15:46 acer kernel: PPP Deflate Compression module registered
Jun 13 23:16:15 acer pppd[3245]: LCP terminated by peer (^])
Jun 13 23:16:17 acer pppd[3245]: Connection terminated.
Jun 13 23:16:21 acer pppd[3245]: Terminating on signal 2.
Jun 13 23:16:21 acer pppd[3245]: Exit.

Cez google som nasiel, ze "LCP terminated by peer (^])" moze byt tym,ze medzi
prikazmi chyba sekvencia AT+CGDCONT=1,"IP","Internet". U mna je.
Potom moze byt problem, ze ATD*99***1# je pouzitie profilu 1 v telefone. To 
ale neviem ako zistit, ci tento profil existuje a ako je nastaveny.

Prikazy su:
pppd call gprs_etdatacard
kde
acer:/etc/ppp/peers # cat gprs_etdatacard
  noauth
  connect "/usr/sbin/chat -v -f /etc/ppp/chatscripts/gprs_et"
  defaultroute
  /dev/modem
  115200
  persist
  usepeerdns
  user ""
  noipdefault
  novj
  logfile /var/log/ppp-gprs
  lcp-echo-interval 0
a
acer:/etc/ppp/chatscripts # cat gprs_et
TIMEOUT 15
ABORT BUSY
ABORT "NO CARRIER"
ABORT ERROR
"" 'ATE0V1'
OK 'AT'
OK 'AT+CGDCONT=1,"IP","Internet"'
SAY "Pripajam ET GPRS\n"
OK 'AT'
OK ATD*99***1#
CONNECT \d\c

Mam v postupe nejaku chybu, pre ktoru by to nemalo fungovat?

Zdravi
-- 
Pavel Kosarnik